That’s how RackTables works. You create the top level block. Then you can
either assign the whole block or parts of it.
There’s an example in the demo at the moment -
http://demo.racktables.org/index.php?page=ipv4space&tab=default&eid=109&hl_net=1
Kind regards,
From: racktables-users-bounce@xxxxxxxxxxxxx
[mailto:racktables-users-bounce@xxxxxxxxxxxxx] On Behalf Of Stuart McGrath
Sent: 27 March 2017 14:23
To: racktables-users@xxxxxxxxxxxxx
Subject: [racktables-users] hierarchy IPv4 Space
Hi All,
I not sure if I have miss something but is there a way within IPv4 Space
section to create a Summary Subnet and then break that summary subnet into
child subnets? As I would like to create a top level summary address ie /22 or
/23 and then within these ranges, create smaller /27, /25 etc. As we assign
each customer a summary address and then break it down into a per vlan
assignment.
Kinds Regards
Stuart
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@xxxxxxxxxxxxxxx
http://www.CustodianDC.com