BTW: Nothing stopping us from using ASMLib for "steroids" option is it simplifies setup and development time :-) Best Regards, Yury Velikanov Oracle ACE Director j.velikanovs@xxxxxxxxx +371 27871545 (while in Riga) Twitter: @yvelik <https://twitter.com/yvelik> | Linkedin<http://au.linkedin.com/in/yuryvelikanov> | AboutMe <https://plus.google.com/u/1/107075205411714880234/about> On Mon, Jan 20, 2014 at 12:01 PM, Marcin Przepiorowski <pioro1@xxxxxxxxx>wrote: > Hi Ludovico, > > Udev - you are right - that's actually will be more challenging part : > 1. we have to create empty ASM VDI disk to keep WWIDs for udev > 2. create a init script build in into Linux to discover new disks and map > it on BOTH sides ;) > > Both are possible - number 1 looks much easier and compression ratio of > empty disk is typically very good ;) > > regards, > Marcin > > > > On Mon, Jan 20, 2014 at 9:54 AM, Ludovico Caldara < > Ludovico.Caldara@xxxxxxxxxxxx> wrote: > >> Hi Marcin, >> udev, not asmlib :-) >> >> It's a pity that we need to stop just before the boring part. >> If we go with VDIs, we should document how to verify if the disks and >> networking components are ok after plugging them into Vbox, or the >> installation will fail. >> >> Best regards >> >> Ludovico Caldara >> Senior Consultant >> Infrastructure Managed Services >> >> *tri*vadis AG >> Rue Marterey 5 >> CH-1005 Lausanne >> >> Phone +41-58 459 54 54 >> Fax +41-21-321 47 01 >> Mobile +41-79-909 72 75 >> ludovico.caldara@xxxxxxxxxxxx >> www.trivadis.com <http://www.trivadis.com/> >> ------------------------------ >> *Da:* racattack-bounce@xxxxxxxxxxxxx [racattack-bounce@xxxxxxxxxxxxx] >> per conto di Marcin Przepiorowski [pioro1@xxxxxxxxx] >> *Inviato:* lunedì 20 gennaio 2014 10.47 >> *A:* racattack@xxxxxxxxxxxxx >> *Oggetto:* [racattack] Re: RACAttack on steroids (how to speed up >> deployment) We need volunteers for implementation >> >> Hi Guys, >> >> I can prepare a VDI - no problem at all. My understanding is that we can >> install all prerequisites and >> configure ASMLib to make it ready for CRS installation ? Yury is that >> correct ? >> >> >> regards, >> Marcin >> >> >> On Sun, Jan 19, 2014 at 12:33 PM, Yury Velikanov >> <j.velikanovs@xxxxxxxxx>wrote: >> >>> Hi Team, >>> >>> I don't want to hijack the thread just want to through an additional >>> idea. >>> While scripting could speed up the setup it will require some >>> development efforts + portability to other platforms. >>> >>> On the other hand as VBox and OLinux are opened (GNU) products nothing >>> stopping us to create VDI disk with OS pre-installed and RAC setup done. We >>> publish it on the net and pass it to participants via USB (we can do it as >>> those are GNU). >>> The only thing that participants will need to do is to go through VBOX >>> VM hosts setup. This is where VBOX scripts could be handy :) >>> >>> If we combine those two methods the setup (for those who want) could >>> be significantly faster :) >>> >>> NOW WE NEED A VOLUNTEERS who would be willing to configure VM VDI >>> files as close to RAC install as possible (exactly following existing 12c >>> RAC Attack instructions), test the VDI with other volunteer and publish it >>> to public along with instructions how to use it. >>> >>> >>> PS: BTW Bjoern as far as I know *I may be wrong* Windows version of >>> VirtualBox is slightly different. On couple of occasions I didn't find >>> commands available on on other platforms). >>> >>> What do you think about the idea? >>> >>> Best Regards, >>> >>> Yury Velikanov >>> Oracle ACE Director >>> >>> j.velikanovs@xxxxxxxxx +371 27871545 (while in Riga) >>> Twitter: @yvelik <https://twitter.com/yvelik> | >>> Linkedin<http://au.linkedin.com/in/yuryvelikanov> >>> | AboutMe <https://plus.google.com/u/1/107075205411714880234/about> >>> >>> >>> >>> On Sun, Jan 19, 2014 at 1:27 PM, Marcin Przepiorowski >>> <pioro1@xxxxxxxxx>wrote: >>> >>>> Hi Guys, >>>> >>>> I'm using VBoxManage in my scripts - I can do it more portable to >>>> other OS-es but I don't have a Mac. So I can do Windows / Linux but someone >>>> has to do Mac. >>>> >>>> Do we have a common github for scripts like for a book ? >>>> >>>> regards, >>>> Marcin >>>> >>>> >>>> On Sun, Jan 19, 2014 at 9:16 AM, Bjoern Rost <b.rost@xxxxxxxxxxx>wrote: >>>> >>>>> Good morning, >>>>> >>>>> > I have a quick question about VBOX activities automatisation scripts >>>>> (create VMs, creating storage, defining VM network interfaces etc). Would >>>>> those scripts be dependents on OS of a workstation? As of based on my >>>>> experience participants have 3 OS types: Win 7, Win 8, Mac OS. Is it >>>>> possible to write one set of scripts to be used on popular platforms? >>>>> >>>>> I think so. VirtualBox comes with a commandline interface called >>>>> VBoxManage. The subcommands used to control the VMs are the same on all >>>>> host platforms (as far as I know). Of course, some of the paths (where to >>>>> put the virtual disks) and device names might be different. This could be >>>>> solved by making those parts configurable. >>>>> >>>>> cheers >>>>> bjoern >>>>> >>>> >>>> >>>> >>>> -- >>>> Marcin Przepiorowski >>>> http://oracleprof.blogspot.com >>>> >>> >>> >> >> >> -- >> Marcin Przepiorowski >> http://oracleprof.blogspot.com >> > > > > -- > Marcin Przepiorowski > http://oracleprof.blogspot.com >