[python] Re: stainless python

  • From: Tihamer Juhasz <balamber@xxxxxxxxx>
  • To: python@xxxxxxxxxxxxx
  • Date: Fri, 10 May 2013 07:18:12 +0300

I used threaded headsets, a discarded fork for the 28.6 mm tube, lots of
welding, a quick release and two steel plugs. Will take it apart and take
some pictures of it and then its easier to explain and understand how it
works.

Tiha


On Fri, May 10, 2013 at 2:17 AM, chris williams
<chriswilliams67@xxxxxxxxx>wrote:

> What did you use for the pivot? A headset? It looks like you have a quick
> release on it!
>
>
> On Thu, May 9, 2013 at 5:33 PM, <r.mccrady@xxxxxxxxxxx> wrote:
>
>> I'm always interested in seats. Do you buy or build yours? As much detail
>> as you can provide is welcome! Thanks, and nice job.
>>
>> -Rod
>>
>> ------------------------------
>> *From: *"Tihamer Juhasz" <balamber@xxxxxxxxx>
>> *To: *python@xxxxxxxxxxxxx
>> *Sent: *Thursday, May 9, 2013 3:11:25 PM
>> *Subject: *[python] Re: stainless python
>>
>>
>> Hi Paul,
>>
>> Sorry, it was my mistake. I did not give access to anybody who uses the
>> link. Please try this link now:
>>
>>
>> https://plus.google.com/photos/115292543199069523585/albums/5875961104825681585?authkey=CN_DmtGc5s2DLQ
>>
>> Best, Tiha
>>
>>
>> On Thu, May 9, 2013 at 5:17 PM, Paul Cartwright <
>> paulcartwrightx@xxxxxxxxx> wrote:
>>
>>> Hi Tiha,
>>> I would love to see pics of your new bike, but I can't access them.  Can
>>> you send the pics in another form?  Sounds like a great project!!
>>> Thanks,
>>> Paul
>>>
>>>
>>> On Thu, May 9, 2013 at 9:04 AM, Tihamer Juhasz <balamber@xxxxxxxxx>wrote:
>>>
>>>> Hi Jürgen and all,
>>>>
>>>> Finally finished my bike mostly. It has a 120 cm wheelbase, 65 degrees
>>>> pivot angle (intended it to be 65degr, but need to measure it to have an
>>>> exact value), 2 x 20" wheels, detachable pivot, adjustable seat angle,
>>>> 3-speed hub gear with coaster brake.
>>>>
>>>> It weighs now 11.45 kg, will add some sort of steering rod and a rear
>>>> brake, but I don't expect it to be more than 13 kg. Could have come out it
>>>> even lighter if using thinner tubing (this is 1.5 mm wall thickness SS
>>>> tubing I had left from other projects and used it up now).
>>>>
>>>> Will make some detailed pics of the parts and upload them to a picasa
>>>> album, but here are 2 pics for now:
>>>> https://plus.google.com/photos/115292543199069523585/albums/5875961104825681585
>>>>
>>>> Just tried it in my garage, and was surprised that I was able to ride
>>>> it for approx. 8 m at the first try. Will take it to town to a large empty
>>>> parking lot and see how I can handle it. Looks very promising for now
>>>> though.
>>>>
>>>> All the best and thank you for all.
>>>>
>>>> Tiha
>>>>
>>>
>>>
>>
>

Other related posts: