Hi all
Why are the two bends not in the same place on the right and left main
tube ?
3f.
Make an incision in the inner wall of the right 40x10 tube, 17.2 cm from
the FWaP. Make a second incision 10 cm from the FWaP in the left tube.
Remove the fixing rod. Bend both ends inwards until there is only 8 mm
space left between the tire and the tubes. Tack weld both ends together.
Connect the two ends with two triangular 1.5 mm thick plates and one
rectangular sized plate. Leave 2 cm of space between the plate and the tire.
regards Paul