On Thu, Sep 19, 2013 at 08:01:38AM +0200, Jürgen Mages wrote: > Rembember that especially for the python (unlike most other > recumbents) a lot of steering input comes from the shoulders. So it > is > always a good idea to give shoulders and bottom a good support. OK I see. That could be a major problem with this kind of seat. thx, christian > > Cheers, > Jürgen. > > @chriswilliams67: your last post had 2.2 MB. The list allows only > 150 KB. So either reduce images size or post a link. Thx. > > > On 19.09.2013 00:21, christiananders@xxxxxxx wrote: > >Hi guys > > > >The bulkiest part of a python and many other recumbents is the seat. > >Pythons like Olafs Monty (16") and the Tihas bigger 20" > >http://myrecumbent.blogspot.ro/2013/05/python-turned-peregrine.html > >are nice, because split apart they are pretty small. But the seat keeps > >being bulky. > > > >I could not find any seats like the one I think about. But when doing my > >research I found this wooden seat http://hebike.borec.cz/DSCN9094s.jpg. > >Removing those round sticks from the seat would come close to my idea. > >So basically there are two anatomically formed tubes that just are > >linked together on the ends. Those two tubes are on both sides of your > >spine and are covered with some elastic material to get some comfort. If > >that fits your back very well I would think that comfort is ok and the > >bike is getting much smaller for transport without the need to seperate > >the seat from the rest of the bike. > > > >Do you have some (alternate) ideas for that (a) nonbulky seat? > > > > > >regards, > > > >christian > >============================================================ > > > >This is the Python Mailinglist > > > >//www.freelists.org/list/python > > > >Listmaster: Jurgen Mages jmages@xxxxxx > > > >To unsubscribe send an empty mail to > >python-request@xxxxxxxxxxxxx > >with 'unsubscribe' in the subject field. > > > >============================================================ > > > > > > ============================================================ > > This is the Python Mailinglist > > //www.freelists.org/list/python > > Listmaster: Jurgen Mages jmages@xxxxxx > > To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx > with 'unsubscribe' in the subject field. > > ============================================================ ============================================================ This is the Python Mailinglist //www.freelists.org/list/python Listmaster: Jurgen Mages jmages@xxxxxx To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field. ============================================================