[python] Re: deformation
- From: "Eduardo L P Jr" <edulpj@xxxxxxx>
- To: <python@xxxxxxxxxxxxx>
- Date: Sat, 15 May 2004 13:49:19 -0300
Hi Olaf
Deformation risks are not so great if you use a non-hardened steel. I've
used carbon steel 1045 without troubles.
[]'s Eduardo
Ypê Bike: http://www.ypebike.cjb.net/
Ypê Mono: http://www.ype.unicyclist.com/
----- Original Message -----
From: "olaf" <noll@xxxxxxxxx>
To: <python@xxxxxxxxxxxxx>
Sent: Friday, May 14, 2004 11:26 AM
Subject: [python] deformation
>
>
> Bom dia Eduardo! A turner is now working on the housing to my angular
> bearings. He says there is a risk the housing will be deformed when the
> tubes are welded upon it. He suggest I should make the walls of the
> housing thicker. But that will not fit my design. Can I make any
> arrangements in order to avoid deforming while welding?
>
>
> olaf
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.686 / Virus Database: 447 - Release Date: 14/5/2004
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
Other related posts:
