[python] Re: brazing aluminum ??
- From: brian smith <briannsmith@xxxxxxxxxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Thu, 20 Dec 2007 12:49:27 -0500
Rick,
Thanks for the input.
I'm a long time cyclist ....... well over 100,000 miles in 70 years and
15,000 in the past 4 on a Actionbent understeer recumbent........ which
serves my purposes superbly ....... but for no good reason i hanker for
a python ....... and with limited workshop and zero welding experience
I am making futile ventures into dreaming of a practical way to get a
python up and running.
Whatever I'm very grateful for your positive note
Warmest regards
Brian
On Wednesday, December 19, 2007, at 10:34 PM, Harry Netwood wrote:
Brian, I just got off the phone with my Brother-in-law, He's a long
time aluminum welder, he's tryed the brazing your speeking of, he
dosen't know if he tryed that particular brand, but the one he did try
worked well, he tryed to brake the weld in a vice & it woulden't > brake!
Hope this helps, Rick in CA.
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
