[python] Re: Tubing/welding
- From: Bjørn Harbo <bharbo@xxxxxxxxx>
- To: <python@xxxxxxxxxxxxx>
- Date: Thu, 6 May 2004 20:55:36 +0200
What about 35x15x1,5?
----- Original Message -----
From: "Jürgen Mages" <jmages@xxxxxx>
To: <python@xxxxxxxxxxxxx>
Sent: Thursday, May 06, 2004 5:34 PM
Subject: [python] Re: Tubing/welding
> Hi Bjørn,
>
> welcome to our list.
>
> I have build two pythons with 30x20 tubing. It is ok, but the part between
> chainwheel and front tire you will have to make with narrower material.
> I used massive steel plates here.
> "Buzz boxes" will be ok for your first experiments.
>
> Good luck,
>
> Jürgen.
>
>
> ----- Original Message -----
> From: "Bjørn Harbo" <bharbo@xxxxxxxxx>
> To: "python" <python@xxxxxxxxxxxxx>
> Sent: Thursday, May 06, 2004 3:11 PM
> Subject: [python] Tubing/welding
>
>
> Hello all,
> I am a new member and thrilled by the thought of building a Python. My
metal
> work experience is minimal and I have a few questions:
> I am unable to find (here in Oslo, Norway) tubing in the size 40x10x1,5
mm.
> 40x20x1,5 and 30x20x1,5 are available. What to choose?
> Secondly: I have an extremely simple buzz box type welding machine. Would
it
> be sufficient or do I need the fancy stuff?
> Bjørn
>
> ============================================================
>
> This is the Python Mailinglist at freelists.org
>
> Listmaster: Juergen Mages jmages@xxxxxx
>
> ============================================================
>
>
>
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
Other related posts:
