Jürgen
Each wheel with a block of it's own.
I realise there is a risk of it not being rigid enough for the cornering
stress ?
Only one way to find out :-)
regards Paul
On 15/02/2020 06:53, Jürgen Mages wrote:
Hi Paul,============================================================
do you want to suspend the whole trike rear end with one rubber block,
oder each rear wheel with its own block?
regards Jürgen.
Am 14.02.2020 um 09:05 schrieb paul needham:
Hi all============================================================
Been riding my trike for 6 years now My Python trike builds
<https://atomiczombie.com/forum/threads/my-life-with-python-trikes-mk1-mk1-5-mk2.33/>
and fancy building a new rear end with suspension.
The original Python suspension looks the easiest option , however a few
questions ?
1) Will using 20" forks and wheels change any of the dimensions ? I am
under 80kg but may want to carry up to 20kg of camping gear ?
2) Is the rubber block available in Germany say from Ebay ?
3) If I decided to make my own as suggested using circles cut from inner
tubes how tall should it be ? and what diameter bearing in mind there
will be 2 wheels suspended.
regards Paul
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jurgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================