[python] Re: Pythonjetrike
- From: Dirk Bonné <dirk.bonne@xxxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Wed, 05 Oct 2011 16:53:55 +0200
What would be a reasonable standwidth to relatively securely sit on it?
The ridges under my seat are 18cm apart and it would be fine if I could
tuck teh stand under it (so they do not make a hole in my bananabags).
Dirk
On 05.10.2011 10:26, Jürgen Mages wrote:
> Thanks for your photos, Gabriel. The mailingslist has a restriction of
> 150 KB per mail, but I let them pass through. Additionally I uploaded
> them to your wikipage http://en.openbike.org/wiki/Gabriel
>
> The kickstand of my P3 is more stable (20x10 mm tubes) but surely
> weighs double compared to yours:
>
> http://www.python-lowracer.de/pics/kick_stand_with_steering_stop.jpg
>
> I would estimate about 800 g. Good thing is that during lunch breaks
> one can sit on the bike with legs resting on both pedals.
>
> Jürgen.
>
>
>
> On 04.10.2011 22:10, Gabriel Artavia wrote:
>> Hello Dirk,
>>
>> here the fotos allthough I don't know how much I`m allowed to post.
>> We'll see... Actually the metal plate I used is a little to weak.
>> After some time I have to bend it back in position. So if I'd hat to
>> do it again I would use thicker material.
>>
>> Cheers,
>> Gabriel.
>
> ============================================================
>
> This is the Python Mailinglist
>
> //www.freelists.org/list/python
>
> Listmaster: Jurgen Mages jmages@xxxxxx
>
> To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx
> with 'unsubscribe' in the subject field.
>
> ============================================================
>
>
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jurgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
