I wanna build a python like the one from Gavin Katts, or Mark Schaaf. I think about to take a 50mm thick board for the front part. Then I will cut out the middle for the wheel. So that it gets the form from the Steel frontparts. 2013/8/12 Vi Vuong <vi_vuong@xxxxxxxxx> > Same here, I have worked mostly with metal and some recycled wood for seat > and cargo bed. However, the wood with little or no weather coating could > only last a year or two outdoor, though not bad for free materials. > > Regarding the use of wood for frame, it seems that the swivel seat pivot > is quite suitable, > http://youtu.be/qV0JoDu0c1Q but the form of the frame may come out flat > like the pivot is self... > > Vi > > ------------------------------ > *From:* Tihamer Juhasz <balamber@xxxxxxxxx> > *To:* python@xxxxxxxxxxxxx > *Sent:* Sunday, August 11, 2013 12:04 PM > *Subject:* [python] Re: Python Trike Frame > > Hi Christian, > > I am a metalworking guy, but made this drawing of a wooden Python as a > getaway from the square heads of engineering and metalworking. > No clue if it can be made to work in reality, but hope it helps you as an > inspiration or as an impulse to get you working. > I can give the design to anybody if interested or just use any ideas you > find in it freely. > http://myrecumbent.blogspot.ro/2013/06/flexibike.html > > Regards, Tiha > > > >