[python] Re: PC2 rideable - and test results
- From: "25hz" <25hz@xxxxxxxxxx>
- To: <python@xxxxxxxxxxxxx>
- Date: Mon, 10 Oct 2005 20:33:59 -0400
Sure is. Take the 1/2" bolt out, that is the main pivot bolt, and it comes
apart in less than a minute.
Subject: [python] Re: PC2 rideable - and test results
I was wondering: are the bearings easy to take apart? (For transportation
purpose, mainly train).
Sam
> I think that if you have rod ends at the pivot, and have lots of ground
> clearance under the pivot point to start with(like 4"/10cm) then you can
> adjust just about any python to ride very nicely. You also can tighten up
> the pivot's feel, which riders seemed to like, not to mention the
> simplicity
> of it.
>
>
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
