[python] Re: Front suspension update
- From: Gerald <bepb@xxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Fri, 25 Nov 2011 17:22:57 +0100
Hi,
my 28" Python starred out with full, front and rear suspension, but I
abandoned the front suspension after the first front part construction
proved to weak.
The main reason I abandoned the front suspension on the second try was
that it also showed strong interference with pedaling, which also took a
lot of power.
The rotation point under the seat, at the bottom level of the pivot was
obviously to low and out of the line of force.
Gerald
On 24.11.11 20:31 , Jürgen Mages wrote:
The rotationpoint should be located either ininfinit (which is the
case in your solution) or in the line of force (somewhat above the
line made by seat -> front BB ). The solution of László does not do
that. I would expect it to hop when pedalling.
Yep, and in the final version of this nice bike, László has abandoned
the front wheel suspension:
http://www.youtube.com/watch?v=aJfv8H84jCg
Cheers,
Jürgen.
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jurgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jurgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
