Hi Daryl, thanks!
I use a simple free CAD 2D program called qcad. Find this is good enough for my
needs. For welding I use an old MIG welder.
Greetings Ellie
Sent from ProtonMail mobile
-------- Original Message --------
On Oct 1, 2018, 19:46, drcorle wrote:
Hello Ellie,
I really liked your cad illustration. Do you use iDesign cad app?
Do weld with a mig welder? Fluxcore or gas shield?
I like the way you think and execute your work.
Regards, Daryl
Sent from my iPhone
On Oct 1, 2018, at 10:06 AM, Karl McCracken <karl.mccracken@xxxxxxxxxxx>
wrote:
Hi Ellie -
Thanks for that - it's a great build!
K.
~
Karl McCracken
You can call me on 0770 9966 936
---------------------------------------------------------------
From: python-bounce@xxxxxxxxxxxxx <python-bounce@xxxxxxxxxxxxx> on behalf of
Ellie Bonné <dmarc-noreply@xxxxxxxxxxxxx>
Sent: 21 September 2018 12:02
To: python@xxxxxxxxxxxxx
Subject: [python] Re: Bruised, bloodied & dispirited
Hello Karl,
I sorry to hear you fell badly with the bike. Especially on gravel can be
extra nasty.
Slipping on any wheel (front or back) usually ends with a fall. The weight
distribution of a python makes the rear wheel prone to blocking. I have had
to some accidents because I pulled to hard on the rear brake. My solution
has been to disable the rear brake and in my later builds even neglected to
provide bossing on the rear brake. Instead I have used two brake handles
both going to one front v-brake. You can see a picture on
http://en.openbike.org/wiki/Pony
Kind regards
Ellie
Sent from ProtonMail mobile
null