Hi Ralf, I am forwarding the response from Hanno in the flevo mailinglist: ----- Original Message ----- From: "Hanno Hirsch" <superhanno@xxxxxx> To: <Flevofan@xxxxxxxxxxxxxxx> Sent: Friday, July 30, 2004 9:40 PM Subject: Re: [Flevofan] Bronze bearings > Hello Jürgen and all the other pivot scientists.... > > > I am not an engineer, but the following two postings, one from > > Ralf Weigel (python) and the other from Hanno Hirsch (flevo) > > show, what might be the disadvantage of bronze bushings for > > the steering pivot. > > While I am not only into bronze as material for the bushings, the iglidur > bushings claim to be made of some sophisticated plastic. > > As you flip t6hrough their web pages, you notice, there are a broad variety > of bushings with quite different capabilities, so there shuld be some with > reduced brake-loose-momentums. > > > What Hanno called the "brake-loose-momentum" and Ralf > > calls the "stick-slip-motion" might be very disturbing, when > > riding such a bike. > > It might be disturbing, depending on its level. On a normally steered SWB > Recumbent I have a "rotten" headset, where it takes some force to bring it > out of the center line, its kind of annoying, but not too seriously. > > On a center pivot bike this effekt might be even less disturbing, as you > generate much bigger momentums with the feet at a quite larger lever than > you do usually with the handlebar with the arms. > > as noted before: > > unless we try it, we will never know.... > > Hanno, still curious what outcomes.... ============================================================ This is the Python Mailinglist at freelists.org Listmaster: Juergen Mages jmages@xxxxxx ============================================================