[python] Re: AW: Re: Python geometry in a trike

  • From: Kenneth Stewart <kenny.stewart@xxxxxxxxxx>
  • To: python@xxxxxxxxxxxxx
  • Date: Sun, 3 Dec 2017 21:53:50 +0000

Thank you very much, that is encouraging

Ken


On 3 Dec 2017, at 15:35, drcorle (Redacted sender "drcorle" for DMARC) wrote:

Very impressive!

Sent from my iPhone

On Dec 2, 2017, at 9:55 PM, Kenneth Stewart <kenny.stewart@xxxxxxxxxx> wrote:

Hi Jurgen,

The geometry of the system is definitely Python.

My folder name for this project has always been Python Hammerhead, Python from the geometry and Hammerhead from the appearance and hydrodynamics of the shark.

I have only just started to write up the design process in:-

http://kenstewartartist.com/

I do not sell anything, there are no adverts, it is where I set things down to make it clearer in my own thinking and to record them.

At the moment I am working my way through airflow issues, and I found the tilting effect.

This is right at the beginning of the process, there are no construction or material details, although I do have three or four options that may apply.

One of the factors that kick-started this project was I discovered a neighbour in my street has access to a 2.44m X 1.22m CNC router table.

That means I can design and build in rigid foam, honeycomb polypropylene, polycarbonate, plywood, aluminium.


regards

Ken Stewart





On 2 Dec 2017, at 20:56, Jürgen Mages wrote:

Here they are ;-)

However the steering mechanism does not look python-like to me.

Regards,
Jürgen.

On 02.12.2017 20:15, Christian Kahlmeier wrote:
I would like to see the pics, too ;)
Where are they? Regards, Krischan
------------------------------------------------------------------------
Von: Jürgen Mages <mailto:jmages@xxxxxx>
Gesendet: ‎02.‎12.‎2017 18:39
An: python@xxxxxxxxxxxxx <mailto:python@xxxxxxxxxxxxx>
Betreff: [python] Re: Python geometry in a trike

You are welcome Ken.

I received the pictures - thanks.

Regards,
Jürgen.


On 02.12.2017 10:14, Kenneth Stewart wrote:
Hi Jurgen,

I have been working on a series of development drawings for an
aerodynamic trike using Python geometry.

I think it is only polite to ask your permission before I put the
results so far on my web site, I will be referring to you and

http://en.openbike.org/wiki/Main_Page

I will send you an email with a couple of jpg,s later, so you can watch
out for it and avoid an e-mail with an attachment ending up in your spam
box.


Regards

Ken Stewart.




============================================================

This is the Python Mailinglist

//www.freelists.org/list/python

Listmaster: Jurgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================


<Turning Circle Body 3.0 Level Pres 3.jpg><Turning Circle Body 3.0 Level.jpg>






============================================================

This is the Python Mailinglist

//www.freelists.org/list/python

Listmaster: Jurgen Mages jmages@xxxxxx

To unsubscribe send an empty mail topython-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================


============================================================

This is the Python Mailinglist

//www.freelists.org/list/python

Listmaster: Jurgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================









============================================================

This is the Python Mailinglist

//www.freelists.org/list/python

Listmaster: Jurgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================

Other related posts: