[python] Re: 300 km [x] achieved!

  • From: Jürgen Mages <jmages@xxxxxx>
  • To: python@xxxxxxxxxxxxx
  • Date: Tue, 17 Jul 2018 11:14:28 +0200

Sorry Christian - back to topic.

If you think your built is worthy - I think it is! - you can present it in our wiki. Here is a sample project page, to see how it could look like:

http://en.openbike.org/wiki/The_Mule

If you are unfamiliar with the wiki you can mail me and ask for technical assistance.

Cheers,

Jürgen.



On 16.07.2018 19:17, Christian Winkgen wrote:

Hi Pythonauts!

The last week(s) were quite warm (if not hot) and dry in Germany so I tried to 
cycle to work and back almost each day.
At first I rode my uprights, but then I felt like trying the Python for the 
first longer distance.
For security reasons and because there are stretches with roads and car traffic 
I first changed my back wheel to the already prepared SON dynohub wheel and 
fixed front and rear light. Both are switched to „always on“ mode.

One way to work is about 35 km - meaning a total distance of 70 km ( 43 miles) 
each day.
Adding all the shorter and longer trips (the longest was 50 km) I came to the 
conclusion that I must have finished my learning phase.because I exceeded the 
total 300 km ;-)

That means I am now changing from „beginner“ to „intermediate“ level of riding. 
Sort of. :)

Some thoughts and changes so far:
- Adjusting the chain tension is not easy the way my bottom bracket is fixed. 
Even a slight slack will sometimes cause the chain to fall off the sprocket. I 
am considering to put in a chain tensioner despite the hub gears
- At first I put the seat to a more upright position so I had more clearance to 
the back wheel for a saddle bag. This gave me more control, better view but 
also an awkward angle to peddle. Now I lowered the seat again but put in a 
bigger spacer for the damper of the rear swingarm to raise the bike again. This 
causes the same height, more control and a better (more straight) alignment for 
my legs regarding the pedals
- Driving a straight line becomes more and more easy and automatic. However 
when pedalling this only works safely when I dampen the movements with my hands 
on the handlebar. When there is enough room I always try to ride without 
handlebars and try to make very smooth pedalling movements without jerking 
sideways. It feels like a meditation sometimes. Is this the way to go? But 
sometimes the handlebars really feel safer - maybe just as a feedback for 
steering or a dampening. Not really for steering
- The Azub mesh seat is not optimal for two reasons: 1. when falling in the 
learning phase the mesh gets quickly rubbed though. I have sewn on a strip of 
cordura to fix it. 2. because it is very wide in the front it collides with my 
front wheel or fender when pivoting to 90 degrees. 3. It does not fit my body 
perfectly since I tend to slide down gradually when riding. So maybe I have to 
look for another seat or try to build my own
- Riding freehanded is real fun. On my way home on Friday I bought a big cup of 
ice cream and started riding while eating it. There was an upright racing bike 
rider passing me and his jaw almost dropped when he saw me eating ice cream 
while riding. That was fun.

Jürgen, Vi and all you others who wrote, shot pictures and videos to fuel my 
decision to own a Python:
Thank you so much!
This was the best decision and experience in years and I am glad that I did 
this (after struggling for almost seven years to actually start).

Some impressions from my last trips:
https://www.icloud.com/sharedalbum/de-de/#B0LGf693ZGEkMbx

Enjoy riding!

Cheers,
Christian============================================================

This is the Python Mailinglist

//www.freelists.org/list/python

Listmaster: Jurgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================


============================================================

This is the Python Mailinglist

//www.freelists.org/list/python

Listmaster: Jurgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================

Other related posts: