[pure-silver] Re: tiny hole in emulsion
- From: "Adrienne Moumin" <photowonder2010@xxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Thu, 21 Sep 2006 09:51:39 -0400
Janet,
I think that before you try the permanent Spotone, you ought to give Edwal
no-scratch a try. Might not help, but couldn't hurt and washes out easily.
Persistent air bells plagued me until I became meticulous w/the pre-wash,
keeping it oh-so-close in temp to the developer, and agitating constantly
for well over a minute.
I am also careful to agitate "rhythmically", if you will: bang, bang, swish
one revolution (to left), swish one revolution (to right); repeat the
sequence until there is no feeling left in my hands or arms....... ;-}
Adrienne Moumin
***************************************
on the web at: www.picturexhibit.com
Saatchi Gallery: http://tinyurl.com/hw6r3
Tiny Fine Art: http://tinyurl.com/o2ldp
***************************************
From: Janet Cull <jcull@xxxxxxxxxxxxx>
Subject: [pure-silver] tiny hole in emulsion
Date: Wed, 20 Sep 2006 21:42:42 -0400
Hello and thank you for the help you gave me on my prior post. The
best image (wouldn't you know) on a roll of 120 film has a little
hole in the emulsion. Is there a fix? (I don't mean by scanning and
printing digitally.) I plan to print it myself in the darkroom, if
that's possible. Thanks again.
Janet
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
