[pure-silver] Re: beseler 23 c

  • From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
  • To: <pure-silver@xxxxxxxxxxxxx>
  • Date: Fri, 24 Sep 2004 22:22:00 -0700

----- Original Message ----- 
From: "BARRY BRINKMAN" <bbrinkman@xxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Friday, September 24, 2004 3:06 PM
Subject: [pure-silver] beseler 23 c


> Does anyone know the best way to restore the correct 
> tension in the counterbalance spring on a beseler 23 c II? 
> Does the enlarger head have to be positioned at the mid 
> point of the column as a starting point?   The instruction 
> manual is as clear as mud.
> B. Brinkman
>
   If this is the sort of counterbalance that's like a 
measuring tape you may have to replace it. I just looked at 
the spring balances on both my Omega D2v and on an old Solar 
enlarger, neither appears to have any means for adjusting 
the tension.

---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx


=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: