[pure-silver] Re: Print-Flattening Metal Plate

  • From: "bobkiss caribsurf.com" <bobkiss@xxxxxxxxxxxxx>
  • To: "pure-silver@xxxxxxxxxxxxx" <pure-silver@xxxxxxxxxxxxx>
  • Date: Tue, 2 Jan 2018 06:01:36 -0500 (EST)

The reason galleries charged higher prices for unmounted prints was exactly as 
Jose Orraca said. And he DID know because he was one of the most respected 
photo conservators in the world, consulting with museums and galleries around 
the globe. I think I will continue to believe him... 



From: "hksvk" <hksvk@xxxxxxxxxxx> 
To: "pure-silver@xxxxxxxxxxxxx" <pure-silver@xxxxxxxxxxxxx> 
Sent: Monday, January 1, 2018 10:57:12 PM 
Subject: [pure-silver] Re: Print-Flattening Metal Plate 

I have been told by one who should know that, in the 1970’s and ’80’s, when 
people began to pay real money for ‘art’ photographs by the prominent 
photographers of the day, gallery owners put higher prices on unmounted prints, 
so they naturally began to be thought of as somehow ‘better’ and more valuable. 
But the only reason for the higher prices was that there were fewer of 
them---photographers’ general practice was to mount the prints they really 
cared about. Personally, I worked on a show of Arnold Newman prints—they had 
been mounted for 40-50 years by that time and were in excellent condition. 
True, they were very slightly yellowed but without seeming faded. They felt 
that they truly were ‘vintage’ prints. 

But now there is archival dry mounting tissue called BufferMount, made by Seal 
that is acid free to obviate fading. This tissue is also termed ‘archival’ 
because the photograph can be pretty easily removed from the rag board with 
judicious application of heat without damage to the print. Whoops, just now I 
see that this tissue is no longer available. 

My experience is that matted but unmounted fiber prints larger than about 11x14 
can become too wavy for decent viewing if they are in conditions of high 
ambient humidity. If fastened with plastic corners (or corners formed with 
folded rag paper) they can buckle by trying to expand against the corners 
because the prints expand more than the rag paper that the corners are fastened 
to. A good solution is to ‘hinge’ them to the board with archival tape along a 
short edge. 

Among other possible reasons, museums would be burdened by the additional space 
that mounted prints would consume. 

Harry 





On Jan 1, 2018, at 2:22 PM, bobkiss [ http://caribsurf.com/ ;| caribsurf.com ] < 
mailto:bobkiss@xxxxxxxxxxxxx ;| bobkiss@xxxxxxxxxxxxx ] > wrote: 

I don't know what Kraft paper is. Is it 100% cotton and lignin free? 



From: "`Richard Knoppow" < [ mailto:dickburk@xxxxxxxxxxxxx ;| 
dickburk@xxxxxxxxxxxxx ] > 
To: " [ mailto:pure-silver@xxxxxxxxxxxxx ;| pure-silver@xxxxxxxxxxxxx ] " < [ 
mailto:pure-silver@xxxxxxxxxxxxx ;| pure-silver@xxxxxxxxxxxxx ] > 
Sent: Monday, January 1, 2018 12:41:49 PM 
Subject: [pure-silver] Re: Print-Flattening Metal Plate 

In this flattening method the flat plates never touch any part of the print. 
The emulsion side is in contact with mounting release tissue and the support 
side with several thicknesses of absorbent material like Kraft paper or photo 
blotter. The sandwich is taken from the press and put under between the flat 
weights. Anything in plywood weights would have to go through two or so sheets 
of mount board and the other stuff. 

On 1/1/2018 6:31 AM, bobkiss [ http://caribsurf.com/ ;| caribsurf.com ] wrote: 

BQ_BEGIN

Just a few additions to this thread: 

1) Plywood is made with acids and putting it in direct contact with a warm 
print, especially one that is outgassing moisture, may well reduce the 
longevity of the print and mount board. At least put some inert coating (that 
hopefully transfers heat) on the surface of the plywood that will be in contact 
with the print. 

2) Further, using any paper other than acid and lignin free paper in contact 
with the surface of the warm print can have the same result. Gaylord and 
University products sell 100% cotton paper for exactly this type of use. 

3) A world renowned photo conservator, Jose Orraca, who died in 2009, advised 
me regularly on proper print conservation procedures. He was renowned for, 
among other things, removing dry mounted Ansel Adams prints from damaged or 
degenerated mount boards. When I asked him if I should dry mount my prints he 
had two answers: 
A) To give him tons of future work and income from removing my prints from 
degenerated mount boards, please do. 
B) As proper museum and conservation practice DO NOT dry mount prints. He said 
to use small tabs of archival tape from the back of the print to the back of 
the "window" over-matte. Or use four archival corners to hold the print in 
place. 

I have learned long ago that one cannot confuse people with the facts so I 
don't expect many to heed this advice; we are creatures of habit. But I would 
be remiss not to put the facts out there. Your decision. 

NEW YEAR'S CHEERS! 
BOB 





From: "Les Myers" [ mailto:baroque-2@xxxxxxxxx ;| <baroque-2@xxxxxxxxx> ] 
To: [ mailto:pure-silver@xxxxxxxxxxxxx ;| "pure-silver@xxxxxxxxxxxxx" ] [ 
mailto:pure-silver@xxxxxxxxxxxxx ;| <pure-silver@xxxxxxxxxxxxx> ] 
Sent: Sunday, December 31, 2017 1:02:01 PM 
Subject: [pure-silver] Re: Print-Flattening Metal Plate 

Thank YOU for republishing Richard's dry mounting instructions. As I read them, 
I realized that he describes my process, but without the plates. I have an old 
Seal press that is VERY heavy, and it's down THERE on the floor next to the 
"wet" side of the darkroom. When I want to use it, I flex some little-used 
muscles and heft the thing to the table. I affix dry mount tissue to the 
corners of the board using a tacking iron. 

Happy New Year to all, and may none of your issues be too pressing in 2018. 

Les 



BQ_BEGIN

-----Original Message----- 
From: [ mailto:photowonder2010@xxxxxxxxxxx ;| photowonder2010@xxxxxxxxxxx ] 
Sent: Sun, 31 Dec 2017 00:02:57 +0000 
To: [ mailto:pure-silver@xxxxxxxxxxxxx ;| pure-silver@xxxxxxxxxxxxx ] 
Subject: [pure-silver] Re: Print-Flattening Metal Plate 



Thank you so much to everyone who has weighed in with ideas and methods for 
post-dry mounting weighting of prints. 




A similar query in a facebook group yielded someone who actually has the type 
of metal plate I want, so now that I have seen the pictures and description, I 
am waiting to hear the ...drumroll... price! I have a big thick piece laminated 
shelf from years ago, courtesy of Ikea, but it is just too heavy and I really 
want metal for the temp conductivity. 




I also realized that I need to get a larger press(!!) since the 1" throat on my 
16x20 will not allow the prints in the center of the collage to fit. So the 
hunt is now on for something bigger. My own danged fault for having *large* 
ambitions! \uD83D\uDE0A 




Lifelong collage artist (read: packrat) that I am, I actually have saved 
Richard's dry mounting instructions from 2007(!) - so no need to test out your 
carpal tunnel surgery here (which I am so very sorry you had to go through!) I 
have followed these instructions faithfully over the years with a couple of my 
own tweaks, and now have them committed them to memory but of course still have 
the original e-mail saved in a word doc, so here ya go: 





From: "Richard Knoppow" < [ 
http://by118fd.bay118.hotmail.msn.com/cgi-bin/compose?curmbox=00000000-0000-0000-0000-000000000001&a=89106930d8e7d424713ebae056b902aa373bbddc486d6846fc5828abb374e0ae&mailto=1&to=dickburk@xxxxxxxxxxxxx&msg=EA840FB8-DC94-4DA7-9FF5-1955070F03BC&st%20
 | dickburk@xxxxxxxxxxxxx ] > 

Subject: [pure-silver] Re: how to use release paper? 

Date: Mon, 15 Oct 2007 19:22:15 –0700 



FWIW, the method I now use for dry mounting is based partially on a procedure 
described in a booklet published by Seal in the past but no longer available, 
plus some changes I've found useful in practice. 



The difference between this method and some others is that I bond the dry 
mounting tissue to the print first. The first step is drying and flattening the 
print as described. I also dry out the mounting board in the press for a couple 
of minutes. 



When the print has been dried and flattened I tack a piece of dry mounting 
tissue to it at a spot on one edge. I then make a sandwich of the print and 
tissue by laying the print face down on a sheet of release paper with some 
padding under it. I then place another sheet of release paper over the mounting 
tissue and some layers of padding on top of that. The entire assembly is then 
put in the press and locked down for perhaps 1 to 2 minutes, what ever time is 
necessary to fuse the tissue. The sandwich is then removed and placed under the 
weight to cool. When cool the release paper will strip right off the excess 
mounting tissue. The tissue will have bonded smoothly to the entire back of the 
print. I then trim the print and tissue together to the desired size and shape. 
I then tack the print to the mat, again at a spot at one edge, and place a 
sheet of release tissue over the print along with several sheets of padding 
paper, construction paper or blotter paper works well for this. The assembly is 
than placed in the press and locked down for the time recommended for bonding 
the tissue, typically about 2 minutes. The entire assembly, including the 
release tissue and padding, is then put under the weight to cool. The cooling 
time depends on the thickness of the assembly and the type of material the 
weight is made of. For aluminum it might take no longer than about 2 to 3 
minutes, for wood perhaps 5 or more minutes. Experience will tell. 



When the finished print comes out the release tissue will just lift off. The 
result is a very flat and very smooth mount with no excess tissue or bleeding 
at the edges. Because the tissue is fused to the two surfaces separately there 
is much less chance for bubbles or wrinkles to form. I still like dry mounting 
for display prints because IMO it gives the most uniform surface, especially 
for glossy or nearly glossy paper. Archivists and gallery people prefer 
unmounted prints because dry mounted prints can be very difficult to remove 
from their mats should some future treatment of the print or replacement of the 
mat become necessary. The drying method works well for prints to be mounted on 
hinges or corner mounts. When low temperatures are used it does no damage to 
the prints. I typically set the press for about the temperature for fusing 
color mount tissue although temperatures lower than this, as low as 150F or 
perhaps even less, will work well for drying. 



Note: Some old Kodak instructions show tacking the release tissue and print by 
making an X across the back. This is bad practice and will very often result in 
wrinkles or bubbles. Tacking at a spot or short line at one edge works a lot 
better. This is the method recommended by Seal. 

--- 

Richard Knoppow 

Los Angeles, CA, USA 


http://by118fd.bay118.hotmail.msn.com/cgi-bin/compose?curmbox=00000000-0000-0000-0000-000000000001&a=89106930d8e7d424713ebae056b902aa373bbddc486d6846fc5828abb374e0ae&mailto=1&to=dickburk@xxxxxxxxxxxxx&msg=EA840FB8-DC94-4DA7-9FF5-1955070F03BC&st%20
 | dickburk@xxxxxxxxxxxxx ] 





Thank you, Richard, and thank you, everyone, for all the advice and camaraderie 
over the years - decades, actually! I have been part of this wonderful group 
since about 1986! 




Wishing a Happy New Year to you all, 

Adrienne 


Adrienne Moumin 
Handmade B&W photographs and photo collages: [ http://picturexhibit.com/ ;| 
http:// ] [ http://picturexhibit.com/ ;| picturexhibit.com ] 
Architextures series: [ http://picturexhibit.com/html/architextures.html ;| 
http://picturexhibit.com/html/architextures.html ] ;
NYC and Silver Spring, MD 
212-602-1809 


============================================================================================================To
 unsubscribe from this list, go to [ //www.freelists.org/ ;| 
www.freelists.org ] and logon to your account (the same e-mail address and 
password you set-up when you subscribed,) and unsubscribe from there. 

BQ_END

-- 
Richard Knoppow [ mailto:dickburk@xxxxxxxxxxxxx ;| dickburk@xxxxxxxxxxxxx ] 
WB6KBL 


BQ_END



Other related posts: