As far as the risk of failure, its there anyway. I'll have a washer with the same connectors right next to this one. Whether its the hose to the washer or the hose to the darkroom sink that totally fails it will be a mess. Then again with plumbing what isn't. The most likely failure though won't be a blown out hose. It will be a gradual leak, usually at a connection that should be fairly easy to route and be seen so it can be fixed before major damage. Im the first to admit solid pipe would be better, and I might do it that way, but then that will take much more of a plumbing job, and there the risk of a leak would be in the wall and much harder to fix. Its also very unlikely to happen.
Its just not a usual way to do things. PVC pipe, metal or copper pipes are all ordinary was to handle drinking water. The rubber hoses to the washer only handles wash water. I was mainly concerned that something in the hose material might somehow effect the photo prints. Then again photography isn't lab work. Most things don't need to be that pure or the whole process would haven't been developed so long ago. Yet still if its a known problem that I just don't know about (which in photography is a lot) its worth the extra time, expense and headache to put the lines in the wall. ----- Original Message ----- From: "Bogdan Karasek" <bkarasek@xxxxxxxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx> Sent: Thursday, December 28, 2006 5:22 PM Subject: [pure-silver] Re: More on Sink project
Hi, see below: Russ Gorman wrote:Use washing machine hoses- more reliable.If you go this "soft route" rather than real pipes just realize that if the hose fails when you are not around, it floods the room unless you turn off the water before the hoses after using darkroom each time.I really don't see this "soft route" as being a problem in the darkroom. I have had the washing machine hooked up for 16 years in the house we are in now and the hoses have never failed me (valves are always left open) so I don't see why it would fail in the darkroom.Cheers, BogdanOn Dec 28, 2006, at 12:45 PM, Mark Blackwell wrote:Well as hopefully the house I am about to buy will close tomorrow, the actual sink construction looms closer. Now a couple of thing I had not thought about come to mind. I am going to be tying into the line for the washer so an easy way to do it might be to just put a Y fitting on the end of whats there and run other washing machine hose over to where I need the end to be. Or for that matter even regular garden hoses. It will certainly be easier, but wouldn't be as durable. Still if it gets me out of making holes in dry wall, drilling holes for pipe then fixing the dry wall again, I can live with it. The other thing that came to mind is there likely anything in those hoses, or anything the water might pick up that could cause a problem that wouldn't be there with plumbing pipe. Running pipe is better than ruined prints. I can not see that it would be that big of an issue, but then again I've been wrong many times. TIA MarkRuss Gorman Photography Portland Oregon <http://www.russgormanphotography.com>-- ________________________________________________________________ Bogdan Karasek Montréal, Québec e-mail: bkarasek@xxxxxxxxxxxx Canada "I photograph my reality" __________________________________________________________________ =============================================================================================================To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.
============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.