[pure-silver] Re: Moldy Slides

  • From: "Ralph W. Lambrecht" <info@xxxxxxxxxxxxxxxx>
  • To: pure-silver@xxxxxxxxxxxxx
  • Date: Thu, 4 Feb 2010 18:47:37 +0100

I definitely don't want them that clean!





Regards



Ralph W. Lambrecht

http://www.darkroomagic.com


This electronic message contains information that is confidential, legally privileged or otherwise protected from disclosure. This information is intended for the use of the addressee only. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, printing or any other use of, or any action in reliance on, the contents of this electronic message is strictly prohibited. If you have received this communication in error, please notify the sender and destroy the original message immediately.

P don't print this e-mail unless you really have to






On Feb 04, 2010, at 17:34, Nicholas O. Lindan wrote:

"Ivan Shukster" <shukster@xxxxxxx>


Bleach is one of the most commonly used substance to kill mold

Bleach will cause the gelatin to release from the film base:
you will end up with a clear, albeit mold-free, bit of perforated
plastic and some slimey colored guck floating about in the wash liquid.

==
Nicholas O. Lindan
Cleveland Engineering Design, LLC
Cleveland, Ohio 44121

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = ====================================================================== To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.

Other related posts: