hi! the same technic works with large rolls of film...i cut fron a @5 inch roll of panatomic x on a 1000 foot roll....rolls are availkable in a 10 inch width as well @ebay...but it is b&w dup film...can be used for general work...rich On May 16, 2010 4:22 PM, "K W Hart" <kwhart1@xxxxxxxxxxx> wrote: Some time ago, I got a great deal on some 24" wide RA-4 Kodak paper. I wanted 20x24" sheets. I had to cut the paper pretty accurately because my processor is 20" wide- actually about 20.5". I set up an 8' table in my darkroom, clamped down my paper cutter, and put some tape on the table at the 20" point. I cut notches in the roll paper box and put a pipe through the core of the roll and rested the pipe in the notches. About an hour later, I had the entire roll cut down. Be sure to have some music on, because it's a very boring task! Ken Hart > How about cutting down the sheets (to exact size) after the paper has > been processed? > > I us... -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.819 / Virus Database: 271.1.1/2877 - Release Date: 05/16/10 02:26:00 ==================================================================================================...