----- Original Message ----- From: "Bogdan Karasek" <bkarasek@xxxxxxxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx> Sent: Tuesday, April 03, 2007 9:14 PM Subject: [pure-silver] Re: Cleaning a Drum Dryer
This makes sense. Presumably the prints were washed free of hypo before toning (a good idea for bleach and redevelop toner). The hardener itself and leftover toner should wash out pretty quickly. Again, I hope Dave Valvo will see this and have time to respond, he is he expert here.Hi,Just to add what Kodak has to say on the matter. Both Sepia Toner and Sepia Toner II warm toner give the same directive after the prints have been toned and washed for 30 secs."Harden the print for 2-5 minutes in a hardening bath composed of 1 part KODAK liquid hardener in 13 parts of water or 2 parts KODAK stock hardener F-5a in 16 parts of WaterWash Fiber base for 30 minutes at 18-21°C * 65-70°F (4 min. for RC)"Cheers, Bogdan
--- Richard Knoppow Los Angeles, CA, USAdickburk@xxxxxxxxxxxxx
============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.