RE: PTR1 putting in way too many headings!
- From: "Frank Cuta" <cuta@xxxxxxxxxxxxx>
- To: <ptr1-users@xxxxxxxxxxxxx>
- Date: Wed, 16 Dec 2009 04:40:50 -0800
the butten that is the second one down on the left that inserts headings
also lets you remove then
although just one at a time
a note on the noise level setting
auto track marks can be great when making recordings off the radio
I set increment to 3 and usually get marks added between the articls on
the radio reading service
the noice level determines at what point the sound level has to drop
before a track mark is added and the increment determines how long the
sound has to stay down at that level
frank
-----Original Message-----
From: ptr1-users-bounce@xxxxxxxxxxxxx
[mailto:ptr1-users-bounce@xxxxxxxxxxxxx] On Behalf Of Gary Schindler
Sent: Tuesday, December 15, 2009 6:15 PM
To: ptr1-users@xxxxxxxxxxxxx
Subject: Re: PTR1 putting in way too many headings!
if you have already recorded the headings will remain. the thing I think
you can do is join all the sections together with an editor like Sound
Forge or Goldwave.
----- Original Message -----
From: Sharon <mailto:mt281820@xxxxxxxxxxx>
To: ptr1-users@xxxxxxxxxxxxx
Sent: Tuesday, December 15, 2009 8:34 PM
Subject: RE: PTR1 putting in way too many headings!
Will this work for both music and speech?
It's really valuable.
Sharon
-----Original Message-----
From: ptr1-users-bounce@xxxxxxxxxxxxx
[mailto:ptr1-users-bounce@xxxxxxxxxxxxx]On Behalf Of Steve Richards
Sent: Tuesday, December 15, 2009 10:29 AM
To: ptr1-users@xxxxxxxxxxxxx
Subject: Re: PTR1 putting in way too many headings!
Hi There
Follow these steps:
Menu
Select Recording Settings
Input device select anything
Custom Setting accept
Choose a sample rate and accept
Start of recording - choose a time
Choose increment setting THIS IS THE IMPORTANT ONE select 'no setting'
Split phrase select 0.2 seconds
Input Level of Sound select normal
Time to stop recording - choose one
Best wishes,
Steve
----- Original Message -----
From: "Victoria Vaughan" < <mailto:vrvaughan@xxxxxxxxxxxx>
vrvaughan@xxxxxxxxxxxx>
To: < <mailto:ptr1-users@xxxxxxxxxxxxx> ptr1-users@xxxxxxxxxxxxx>
Sent: Monday, December 14, 2009 11:14 PM
Subject: PTR1 putting in way too many headings!
>I am recording some Christmas tapes on my Plextalk Recorder 1 flash
card and
> it is putting in headings throughout many songs.
>
> How do I correct this?
> Is there a way for me to turn off the automatic heading production and
> insert them where I want them, before I record this music to a blank
CD?
>
> Any help will be very appreciated!
>
> Many thanks! Vicky
> ----- Original Message -----
> From: "John" < <mailto:4t5s@xxxxxxxxxxx> 4t5s@xxxxxxxxxxx>
> To: < <mailto:ptr1-users@xxxxxxxxxxxxx> ptr1-users@xxxxxxxxxxxxx>
> Sent: Tuesday, October 13, 2009 8:14 AM
> Subject: Re: RE: Faulty PTR1
>
>
>> IRTI has two numbers. The toal-free number is: (800)222-4784. The
>> regular number is: (530)274-2090. If you record on a card, the
battery
>> life should be around 8-10 hours. The same with "play". On a disc,
4
>> hours would be safe. This is also assumming your battery pack is
good.
>> They are not the greatest packs ever made and new ones are about $75.
I
>> need one but am not about to buy one. Just curious, if you wouldn't
>> mind. Did you get your PTR1 from Ebay? Hope these numbers help.
John
>>
------------------------------------------------------------------------
---
>> To leave the list at any time, please write to
>> < <mailto:ptr1-users-request@xxxxxxxxxxxxx>
ptr1-users-request@xxxxxxxxxxxxx> with unsubscribe ptr1-users in the
>> subject or the body. The list home page is at
>> < <//www.freelists.org/list/ptr1-users/>
//www.freelists.org/list/ptr1-users/>.
>
>
------------------------------------------------------------------------
---
> To leave the list at any time, please write to <
<mailto:ptr1-users-request@xxxxxxxxxxxxx>
ptr1-users-request@xxxxxxxxxxxxx> with unsubscribe ptr1-users in the
subject or the body. The list home page is at <
<//www.freelists.org/list/ptr1-users/>
//www.freelists.org/list/ptr1-users/>.
Other related posts:
