Re: Network folder set Up please help
- From: "Russ Kiehne" <wb6niu@xxxxxxx>
- To: <ptr1-users@xxxxxxxxxxxxx>
- Date: Sat, 11 Feb 2012 06:26:51 -0800
I hope the following will help:
PLEXTALK Pocket Tutorial -Network Folder
PLEXTALK Pocket PTP1 Tutorial
-Network Folder -
Shinano Kenshi Co., Ltd. has the right to change the content on this
tutorial without prior notice.
Table of Contents
1 What you can do with the Network Folder function
2 Set LAN manager authentication level of windows PC
3 Configure the network setting of your Pocket
4 Start Network Folder
5 Log on to the Network Folder at your computer
1 What you can do with the Network Folder function
By using the Network Folder function, your personal computer can access the
SD card in the
PLEXTALK Pocket as a network shared folder via your wireless LAN network.
2 Set LAN manager authentication level of windows PC
* If you use Windows XP or 2000 on your computer, Please skip this section.
Step 1. Download the ‘PLEXTALK Transfer for Pocket’ software from the
PLEXTALK web site
and install it on your computer.
Step 2. Run the PLEXTALK Transfer for Pocket. After the main screen appears,
select
‘Network’ -‘Network Configuration’ on the menu.
Step 3. Select the ‘Local Security Setting’ tab of ‘PLEXTALK setting utility’
dialog box.
Step 4. Press the ‘Start security setting’ button. The ‘Local Security
Setting’ dialog box will
appear.
Step 5. Select “Send NTLM response only”. Press the OK button.
Step 6. You will see a confirmation message box. Press ‘OK’ to confirm.
Step 7. You need to restart your computer to make your computer apply this
new security
setting. The Utility will ask you confirm to restart your computer. Press
‘Yes’ to restart.
3 Configure the network setting of your Pocket
Note: First obtain the information of your home wireless system or an office
wireless system from
your IT department.
Step 1.
Enable the network device on your Pocket. First press the Menu Key and go to
“System settings”-“Network settings”-“Enable or disable network device”
option.
Select ‘Enable’ by the Right or Left Key and press the Down Key. The menu
will
automatically close when the network device becomes enabled.
Note: If your Pocket is already configured for your network, it will
automatically
connect. Skip to section 4.
Step 2.
Search available networks around your Pocket. First press the Menu Key and
go to
“System settings”-“Network settings”-“Wireless network settings” –
“Available
wireless network” option. When you press the Down Key, your Pocket will
start
searching.
Step 3.
When available networks are listed, select the wireless network you want to
connect to
If not configured for your selected network, follow steps 4 and 5.
Step 4.
Input network configurations. Your Pocket will ask you for Security mode,
Password,
Stealth setting, DHCP and IP address, and Proxy server.
Note: You have an option to configure those network settings using the
“Network
Configuration” tab of the “PLEXTALK Transfer for Pocket” software. For more
information, see the ”Help” option of the software.
Security mode: Select the security mode that is set on the access point of
the network.
Password: Input the password, pass phrase or WEP key that is set
on the access point of the network.
Stealth setting: Select OFF.
When your wireless network uses stealth function, select
"ON".
DHCP and IP
address:
Select ‘Enable’.
If the network does not provide DHCP service, select
Disable’ and input an IP address information.
Proxy server: Select ‘Disable’.
If the network is using a proxy server, select ‘Enable’ and
input information on the proxy server.
Step 5. When all configurations are finished, your Pocket will try to
connect to the network.
Step 6. Wait until your Pocket completes the connection. The menu will
automatically close
when it succeeds.
4 Start Network Folder
Step 1.
Enable the Network Folder function. First press the Menu Key and go to
“Media
Management” – “Network folder” option. When you press the Down Key, your
Pocket
will try to enable the function.
Step 2. When the Network Folder function is enabled, your Pocket will tell
you the network
folder device name.
Step 3. By pressing the 5 Key, you can check the Network Folder device name,
user ID,
password, IP address and network status with the SSID name.
5 Log on to the Network Folder at your computer
Step 1.
Press the Start menu of your desktop. Choose Run. (Shortcut Cmd+R)
Step 2.
In the Open box, type \\, your device name and \SDmemory. For example
\\PTP1-1234\SDmemory, and then choose OK. A window appears that shows the
root directories of SD memory.
Step 3. For your convenience, map the network folder to a drive letter. You
can do this using
the file menu of Windows Explorer.
Step 4. When you want to disconnect the network folder, press the * Key of
your Pocket and
press the Enter or # Key.
Note: The default device name is ‘PTP1’ followed by 4-digit serial number
with “-” (hyphen) in
between.
Note: You can use a user ID and password information for security purposes.
Set or change that
information on your Pocket. First press the Menu Key and go to “System
settings”-“Network
settings”-“Network folder setting”. The default setting does not have a
password.
For more information, please see the PLEXTALK Pocket PTP1 User’s Guide.
End of Tutorial
5/5 March 2011
-----Original Message-----
From: GeorTsoukala@xxxxxxx
Sent: Friday, February 10, 2012 9:28 AM
To: ptr1-users@xxxxxxxxxxxxx
Subject: Network folder set Up please help
I am trying to set up the network folder in the plextalk transfer software.
Do I use the same User name and password in the networkfolder setup page?
That I did on the network set up page? Or do I use my computer's username
and password? Thanks For any help.
George
The
---------------------------------------------------------------------------
To leave the list at any time, please write to <ptr1-users-request@xxxxxxxxxxxxx>
with unsubscribe ptr1-users in the subject or the body. The list home page is at
<//www.freelists.org/list/ptr1-users/>.
Other related posts:
