[pskmail] Re: server scan problem

  • From: Rein Couperus <rein@xxxxxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Mon, 09 Jun 2008 10:35:02 +0200

Fred, I tested it here and it works fine on PI4TUE. Set scanning to "S" in 

the .pskmail directory looks like:
drwxr-xr-x 2 rein rein 4096 2008-06-09 09:18 .pskmail

the .pskmail/qrg/freqs.txt file:

This is with pskmail_server-0.7.6

You find the scanner in rflinkserver.pl,  line 1996:
                        } elsif ($scanner eq 'S' ) {

                                $modem = $modes[$mins];

                                setmode($modem); # set fldigi mode

                                $oldmins = $mins;


setmode sends a command string (<cmd> ... </cmd> to fldigi.

modes are read in every hour from .pskmail/qrg/freqs.txt in rflinkserver.pl in 
line 1977:

                        my $pskmodes = $freqhrs[1];

                        print $pskmodes, "\n";

                        @modes = split (",",$pskmodes);

hope this helps,


Rein PA0R

> -----Ursprüngliche Nachricht-----
> Von: "Fred Reiselt" <freiselt@xxxxxxxxxxxxx>
> Gesendet: 07.06.08 00:31:35
> An: pskmail@xxxxxxxxxxxxx
> Betreff: [pskmail] Re: server scan problem

> Hi Alan,
> Thanks for the suggestion. I tried it and got the same result with 
> fldigi except I also got errors from hamlib each minute. I don't have 
> the Kenwood interfaced to the computer to change frequency. I just want 
> to change the mode between PSK63, PSK125, and PSK250 and Rein added the 
> "S" option for that.
> If I knew how pskmail server and fldigi communicated that information, I 
> can probably figure out the problem. Probably a permissions issue.
> I'm gonna dig around on the fldigi site and see what I can find. Being 
> stuck on PSK250 is not too bad though :>)
> Thanks and 73,
> Fred
> wb5con

Other related posts: