[pskmail] Re: jpskmail questions

  • From: "Decossas, Michael" <Mike@xxxxxxxxxxxx>
  • To: "pskmail@xxxxxxxxxxxxx" <pskmail@xxxxxxxxxxxxx>
  • Date: Wed, 26 Aug 2009 13:21:20 -0500

Eric,
     I think Fldigi will lock the frequencies. I do not have the radio on, 
although I have access to the PC (it is at home and I am at work) and I cannot 
remember whether I normally use the lock or not. I generally try to use the 
default settings as much as possible. If you are in DIG mode, the radio dial is 
set to 10.14700 and Fldigi is set to 1000 offset, you should be right on 
10.14800.

Do a ping and see who you hear.

Thanks,

Mike



________________________________________
From: pskmail-bounce@xxxxxxxxxxxxx [pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of 
Eric W. Davenport [kz5ed@xxxxxxxxxx]
Sent: Wednesday, August 26, 2009 1:06 PM
To: pskmail@xxxxxxxxxxxxx
Subject: [pskmail] Re: jpskmail questions

Michael
Thank you for your quick response.

I use the Rigbalster Plug and Play with the 857 and it has been working
fine controlling and doing the sound interface.

I use an inverted V as well so I hope I will hear something. I have an
inverted V as well and it works well on all the other digi modes so I
should hear something.

When you Lock fldigi does that lock the transmit and receive frequencies
to whatever you have set in FLDIGI Freq?
Mine says 10147 and the lock button is Highlighted. I have not touched
anything else.

Thanks
Eric
KZ5ED

Decossas, Michael wrote:
> Eric,
>      Here are the responses to your questions that I can answer.
>      1. Set the frequency on your FT-857 to 147.00. this will put you right 
> on 148.00 for the default offset in FLDigi. I have the same radio and that is 
> what had to happen to get on frequency.
>      2. fldigi, not jpskmail will control the radio. You will need the CT-62 
> cable and a second serial port. For control of the 857, use Hamlib and select 
> your com port(Baud Rate of 38400). Also, check PTT via Hamlib command unless 
> you are using a VOX system like the Tigertronics Signalink USB. All the other 
> settings should work fine as default.
>      3. You should see some beacons, depending on band conditions and your 
> antenna. Most of the servers, that I know of, currently run vertical antennas 
> (which may cause a problem for you if you are horizontal). I am currently 
> running an inverted V at about 30'. Here in New Orleans, I can usually see 
> (via ping) WB5CON & NC5O during the day and only NC5O during evenings.
>      4. Yes, we share with all the other digital modes. Most of the 
> non-pskmail activity I see seems to be Pactor2/3.
>
> As a test, launch fldigi, open jpskmail, click on Link and select ping. This 
> will ping out over the air and any servers that hear you should respond. this 
> should indicate which servers have a good rf path to you.
>
> Hope this helps.
>
> Thanks,
>
> Mike-KB5OZE
> www.selcoms.org
> PSKMAIl Server KB5OZE-2 (still in testing)
> ________________________________________
> From: pskmail-bounce@xxxxxxxxxxxxx [pskmail-bounce@xxxxxxxxxxxxx] On Behalf 
> Of Eric W. Davenport [kz5ed@xxxxxxxxxx]
> Sent: Wednesday, August 26, 2009 12:30 PM
> To: pskmail@xxxxxxxxxxxxx
> Subject: [pskmail] jpskmail questions
>
> Good Afternoon,
>
> I have finally gotten jpskmail installed.
>
> I am running Ubuntu 810
>
> I needed to install Java, I could not determine which version so I
> installed OpenJre first.
>
> The program would not start and gave all kinds of link errors.
>
> I then installed SunJre and still got the errors until I ran the fix
> that fixes the links.
>
> Ok so now I am running.  I have WB5CON as my server.  I am running
> fldigi 3.12  my receiver is set to 10148 DIG mode on FT857.
>
> Fldigi displays in the water fall from 10148 down to 10145.  The
> waterfall only indicates noise from about 10147.5.
>
> I have not heard anything other than short bursts of what I believe is
> packet not psk250, but it may be the same.
>
> I have now moved my frequency up to 10149 to monitor and see if I can
> see anything.
>
>    1. My question is this if I set my radio to 10148 and my sweet spot
>       is 1000hz then where should the marker in fldigi be at.
>    2. When I launch JPSKMAIL it keys the radio and appears to be setting
>       things.
>          1. It does not set the mode.
>          2. It does not position the frequency marker in the waterfall.
>    3. Should I be able to see beacons?
>    4. Do we share the frequency with packet?  The obvious answer is we
>       could be but my question should probably be does PSK250 sound like
>       Packet.
>
>
> I ask these questions because I do not want to make assumptions.
>
> Your help is appreciated.
>
>
> --
> Eric W. Davenport
> Cert-In Software Systems, Inc.
> P.O. 346
> Bakersville, NC 28705
> 800-873-0110
> www.certin.com
>
>


--
Eric W. Davenport
Cert-In Software Systems, Inc.
P.O. 346
Bakersville, NC 28705
800-873-0110
www.certin.com

Other related posts: