[pskmail] Re: jpskmail Server

  • From: "Decossas, Michael" <Mike@xxxxxxxxxxxx>
  • To: "pskmail@xxxxxxxxxxxxx" <pskmail@xxxxxxxxxxxxx>
  • Date: Wed, 26 Aug 2009 19:24:43 -0500

It is, but the pop3 is not set up correctly. I am in the process of doing that 
now...

Can I help? I could not see Eric on either my server or when I cranked up the 
tower....

________________________________________
From: pskmail-bounce@xxxxxxxxxxxxx [pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of 
Russell Blair [russell_blair86@xxxxxxxxx]
Sent: Wednesday, August 26, 2009 7:11 PM
To: pskmail@xxxxxxxxxxxxx
Subject: [pskmail] Re: jpskmail Server

Mike, your server is it on line?.

Russell

1- Whoever said nothing is impossible never tried slamming a revolving door!
2- A government big enough to give you everything you want, is strong enough to 
take everything you have.
- Thomas Jefferson

" IN GOD WE TRUST "

Russell Blair (NC5O)
  Skype-Russell.Blair
  Hell Field #300
  DRCC #55
  30m Dig-group #693


--- On Wed, 8/26/09, Decossas, Michael <Mike@xxxxxxxxxxxx> wrote:

> From: Decossas, Michael <Mike@xxxxxxxxxxxx>
> Subject: [pskmail] Re: jpskmail questions
> To: "pskmail@xxxxxxxxxxxxx" <pskmail@xxxxxxxxxxxxx>
> Date: Wednesday, August 26, 2009, 1:21 PM
> Eric,
>      I think Fldigi will lock the
> frequencies. I do not have the radio on, although I have
> access to the PC (it is at home and I am at work) and I
> cannot remember whether I normally use the lock or not. I
> generally try to use the default settings as much as
> possible. If you are in DIG mode, the radio dial is set to
> 10.14700 and Fldigi is set to 1000 offset, you should be
> right on 10.14800.
>
> Do a ping and see who you hear.
>
> Thanks,
>
> Mike
>
>
>
> ________________________________________
> From: pskmail-bounce@xxxxxxxxxxxxx
> [pskmail-bounce@xxxxxxxxxxxxx]
> On Behalf Of Eric W. Davenport [kz5ed@xxxxxxxxxx]
> Sent: Wednesday, August 26, 2009 1:06 PM
> To: pskmail@xxxxxxxxxxxxx
> Subject: [pskmail] Re: jpskmail questions
>
> Michael
> Thank you for your quick response.
>
> I use the Rigbalster Plug and Play with the 857 and it has
> been working
> fine controlling and doing the sound interface.
>
> I use an inverted V as well so I hope I will hear
> something. I have an
> inverted V as well and it works well on all the other digi
> modes so I
> should hear something.
>
> When you Lock fldigi does that lock the transmit and
> receive frequencies
> to whatever you have set in FLDIGI Freq?
> Mine says 10147 and the lock button is Highlighted. I have
> not touched
> anything else.
>
> Thanks
> Eric
> KZ5ED
>
> Decossas, Michael wrote:
> > Eric,
> >      Here are the responses to your
> questions that I can answer.
> >      1. Set the frequency on your
> FT-857 to 147.00. this will put you right on 148.00 for the
> default offset in FLDigi. I have the same radio and that is
> what had to happen to get on frequency.
> >      2. fldigi, not jpskmail will
> control the radio. You will need the CT-62 cable and a
> second serial port. For control of the 857, use Hamlib and
> select your com port(Baud Rate of 38400). Also, check PTT
> via Hamlib command unless you are using a VOX system like
> the Tigertronics Signalink USB. All the other settings
> should work fine as default.
> >      3. You should see some beacons,
> depending on band conditions and your antenna. Most of the
> servers, that I know of, currently run vertical antennas
> (which may cause a problem for you if you are horizontal). I
> am currently running an inverted V at about 30'. Here in New
> Orleans, I can usually see (via ping) WB5CON & NC5O
> during the day and only NC5O during evenings.
> >      4. Yes, we share with all the
> other digital modes. Most of the non-pskmail activity I see
> seems to be Pactor2/3.
> >
> > As a test, launch fldigi, open jpskmail, click on Link
> and select ping. This will ping out over the air and any
> servers that hear you should respond. this should indicate
> which servers have a good rf path to you.
> >
> > Hope this helps.
> >
> > Thanks,
> >
> > Mike-KB5OZE
> > www.selcoms.org
> > PSKMAIl Server KB5OZE-2 (still in testing)
> > ________________________________________
> > From: pskmail-bounce@xxxxxxxxxxxxx
> [pskmail-bounce@xxxxxxxxxxxxx]
> On Behalf Of Eric W. Davenport [kz5ed@xxxxxxxxxx]
> > Sent: Wednesday, August 26, 2009 12:30 PM
> > To: pskmail@xxxxxxxxxxxxx
> > Subject: [pskmail] jpskmail questions
> >
> > Good Afternoon,
> >
> > I have finally gotten jpskmail installed.
> >
> > I am running Ubuntu 810
> >
> > I needed to install Java, I could not determine which
> version so I
> > installed OpenJre first.
> >
> > The program would not start and gave all kinds of link
> errors.
> >
> > I then installed SunJre and still got the errors until
> I ran the fix
> > that fixes the links.
> >
> > Ok so now I am running.  I have WB5CON as my
> server.  I am running
> > fldigi 3.12  my receiver is set to 10148 DIG mode
> on FT857.
> >
> > Fldigi displays in the water fall from 10148 down to
> 10145.  The
> > waterfall only indicates noise from about 10147.5.
> >
> > I have not heard anything other than short bursts of
> what I believe is
> > packet not psk250, but it may be the same.
> >
> > I have now moved my frequency up to 10149 to monitor
> and see if I can
> > see anything.
> >
> >    1. My question is this if I set my radio
> to 10148 and my sweet spot
> >       is 1000hz then where
> should the marker in fldigi be at.
> >    2. When I launch JPSKMAIL it keys the
> radio and appears to be setting
> >       things.
> >          1. It does not set
> the mode.
> >          2. It does not
> position the frequency marker in the waterfall.
> >    3. Should I be able to see beacons?
> >    4. Do we share the frequency with
> packet?  The obvious answer is we
> >       could be but my
> question should probably be does PSK250 sound like
> >       Packet.
> >
> >
> > I ask these questions because I do not want to make
> assumptions.
> >
> > Your help is appreciated.
> >
> >
> > --
> > Eric W. Davenport
> > Cert-In Software Systems, Inc.
> > P.O. 346
> > Bakersville, NC 28705
> > 800-873-0110
> > www.certin.com
> >
> >
>
>
> --
> Eric W. Davenport
> Cert-In Software Systems, Inc.
> P.O. 346
> Bakersville, NC 28705
> 800-873-0110
> www.certin.com
>

Other related posts: