Paul, I have updated fldigi to 3.13 and set the parameters right. There is no more problem now, only the qrg is 30 Hz low... I will also update the server to 0.9.18. 73, Rein PA0R > -----Ursprüngliche Nachricht----- > Von: "Paul Veldkamp" <Paul.Veldkamp@xxxxxxx> > Gesendet: 09.10.09 14:34:28 > An: "pskmail@xxxxxxxxxxxxx" <pskmail@xxxxxxxxxxxxx> > Betreff: [pskmail] Re: jpskmail 0.3.8 beta test > Hi Andy, > This sounds very good..thanks for the update. I"ll test it as soon as I'm > @home. > > met vriendelijke groeten, with kind regards > > Paul Veldkamp; PA0SON > > > -----Original Message----- > From: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] On > Behalf Of Andy obrien > Sent: vrijdag 9 oktober 2009 14:16 > To: pskmail@xxxxxxxxxxxxx > Subject: [pskmail] Re: jpskmail 0.3.8 beta test > > Paul, I had also tried with AFC off before but now with the settings > that Rein described in his update FAQ, it works well. I just > connected with WB5CON without wandering up the dial. > > Andy K3UK > > > On Fri, Oct 9, 2009 at 6:58 AM, Paul Veldkamp <Paul.Veldkamp@xxxxxxx> wrote: > > Ik gebruik al AFC off. Maar ga vanavond proberen. Tnx > > > > regards > > Paul > > **sent from my wireless BlackBerry** > > > > ----- Oorspronkelijk bericht ----- > > Van: pskmail-bounce@xxxxxxxxxxxxx <pskmail-bounce@xxxxxxxxxxxxx> > > Aan: pskmail@xxxxxxxxxxxxx <pskmail@xxxxxxxxxxxxx> > > Verzonden: Fri Oct 09 06:55:52 2009 > > Onderwerp: [pskmail] Re: jpskmail 0.3.8 beta test > > > > I have updated the wiki FAQ for the new config values for fldigi. > > > > They are in: http://pskmail.wikispaces.com/FAQ+Radio > > > > With these values fldigi should be configured OK for pskmail, and the > > jumping > > around should be minimal. > > > > When that does not help, try using AFC OFF with PSK250... > > > > 73, > > > > Rein PA0R > > > >> -----Ursprüngliche Nachricht----- > >> Von: "Andy obrien" <k3ukandy@xxxxxxxxx> > >> Gesendet: 09.10.09 11:32:23 > >> An: pskmail@xxxxxxxxxxxxx > >> Betreff: [pskmail] Re: jpskmail 0.3.8 beta test > > > > > >> Installed OK, and seems to be working fine. Now if only the next > >> release of FLDIGI would come out with a way to stop the waterfall > >> cursor leaving the center frequency by 300-400 Hz . > >> Thanks > >> Andy K3UK > >> > >> > >> > >> On Fri, Oct 9, 2009 at 3:28 AM, Pär Crusefalk <per@xxxxxxxxxxxx> wrote: > >> > Hi all, > >> > > >> > There is a beta of the coming 0.3.8 release here: > >> > http://www.crusefalk.se/jpskmailinstall/ > >> > > >> > There are installers for windows and linux as well as an archive for > >> > others (Macs etc). > >> > > >> > Test reports are highly appreciated! > >> > > >> > 73 de Per, sm0rwo > >> > > >> > > >> > > >> > > >> > >> > > > > -- > > http://pa0r.blogspirit.com > > > > > > > -- http://pa0r.blogspirit.com