Hi Johan, I am just following on your question to see if it is resolved. I noticed a connect from you to SM0RWO a few days ago. So have you resolved the problem? Regards, John On Thu, Sep 24, 2009 at 5:44 AM, Johan 123 <pe1prx@xxxxxxxxx> wrote: > I am trying to setup a pskmail client system here. Looks like i do have > this problem also. > fldigi version 3.12.4 working together with jpskmail v 0.3.7 > During receive the receive window is jumping around. > Search range is set very limited, but jumpt are outside the search range. > kinds regards > > Johan > > PE1PRX > > > 2009/9/19 Paul <pa0son@xxxxxxxxx> > > Hi John, >> >> >> >> With both versions 3.10 and 3.12.4 it’s impossible to work with a node. >> After the first frames I have a chance at a connect but that ends during >> moving of the RX freq. And it moves more then 100 Hz although the search >> settings are set to 10 Hz. It is pc depended, another laptop works fine. All >> other modes are working fine. Only psk has the problem. >> >> Waiting for 3.13 >> >> Thanks >> >> Regards >> >> Paul; pa0son >> >> >> ------------------------------ >> >> *Van:* pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] >> *Namens * >> John Douyere >> *Verzonden:* zaterdag 19 september 2009 15:16 >> >> *Aan:* pskmail@xxxxxxxxxxxxx >> *Onderwerp:* [pskmail] Re: jittering fldigi 3.10 - 3.12.4 >> >> >> >> Hi Paul, >> >> I will try to find out if there is a target release date for Fldigi 3.13. >> >> I used the alpha version of Fldigi again today with Psk125 and 250 for >> Pskmail and the settings I gave you before produced a very stable decoding. >> With older versions (like 3.10) I would have had a few frames damaged simply >> because of this jitter. >> >> Regards, >> >> John >> >> On Sat, Sep 19, 2009 at 9:22 PM, Paul <pa0son@xxxxxxxxx> wrote: >> >> Hi John, >> >> Tnx for the quick reply. Unfortunately I tried these settings but without >> result. In all other modes, like RTTY, MT-63, Olivia RX-fldigi is I don’t >> have that jittering. >> >> I really hope that 3.13 version will come soon, I have some enthusiastic >> HAMs to start with pskmail tests, but that delays due to this jitter >> problem. >> >> >> >> Reghards >> >> Paul pa0son >> >> >> ------------------------------ >> >> *Van:* pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] >> *Namens *John Douyere >> *Verzonden:* zaterdag 19 september 2009 1:45 >> *Aan:* pskmail@xxxxxxxxxxxxx >> *Onderwerp:* [pskmail] Re: jittering fldigi 3.10 - 3.12.4 >> >> >> >> Paul, >> >> I assume you mean when using the PSK modes. If so, in the modem/psk >> configuration tab, adjust the signal acquisition S/N up (I found 13dB was ok >> for me) and the search range down ( had to put it at 10Hz). The upcoming >> version of Fldigi (3.13, when it comes out) seems to have resolved that >> jitter issue. In the mean time this is the workaround. >> >> Regards, John >> >> On Sat, Sep 19, 2009 at 9:30 AM, Paul <pa0son@xxxxxxxxx> wrote: >> >> Some weeks ago I had a laptop 1.1 Ghz and fldigi 3.12.3 and jpskmail –win >> resulted in a jittering fldigi rx. Using XP. I went to fldigi 3.10 and the >> problem was solved. >> >> Now I try to set up a laptop XP 1,4 GHz for a fellow HAM and fldigi 3.12.4 >> as well as 3.10 are jittering. >> >> Any tip? >> >> >> >> 73 Paul PA0SON >> >> >> >> >> >> >> > >