[pskmail] Re: hamlib rigtype number for Kenwood TS2000 ?
- From: Per Crusefalk <per@xxxxxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Sun, 25 Oct 2009 12:51:04 +0100
sön 2009-10-25 klockan 07:31 -0400 skrev Andy obrien:
> On Sun, Oct 25, 2009 at 4:09 AM, Rein Couperus <rein@xxxxxxxxxxxx> wrote:
> > You can have either rigctl from fldigi OR from the server.
> > Not both.
> >
> > The server needs to control the rig, so rigctl must be OFF
> > in fldigi. PTT is another thing, that should be controlled by
> > fldigi. But that means it only works with hardware PTT or VOX.
> >
> > Rein
> >
>
>
> That makes sense. After getting frequency scan to work though, I had
> someone connect and my rig changed bands on him in the middle of his
> mail attempt. I saw that in the help section, so I was prepared for
> it. Perhaps one day there will be a way to pause a scan if the state
> equals a current connection. At the moment, the fact that it can scan
> frequencies and/or modes is very good, well done.
>
> Andy
>
It does pause the scan if connected, it would not work at all if it
didn't. What I have seen a few times is that the scan is not stopped
fast enough, a station will connect and the server changes frequency and
times out. Then resumes the scan.
73 de Per, sm0rwo
Other related posts:
