VNC access should be working with the same details if you want to remote test. Not tested via the Mi-Fi Second internet route but the settings on the new router look right. Otherwise I await your findigs Roger On 19/04/11 19:14, Rein Couperus wrote: > I think I found it, testing.... > > Rein > >> On 19/04/11 12:08, G6CKR wrote: >>> On 19/04/11 10:04, G6CKR wrote: >>>> On 18/04/11 21:12, G6CKR wrote: >>>>> perfs say minute 2 window says minute 2. >>>>> Since 18:15 it has reverted to minute 0. >>>>> >>>>> http://aprs.fi/?c=raw&call=G6CKR&limit=50&view=normal >>>>> has the evidence. >>>>> 73 Roger >>>>> >>>> Restarted Jpskmail and touched nothing the first beacon went on minute 0 >>>> despite showing 2 in the window. I clicked up to 3 and back down to 2 >>>> and it went again on the 2 (08:17:28 UTC on the raw data) I will leave >>>> it alone to see if it reverts back to 0 by it's self. >>>> 73 Roger >>>> >>> I see from raw packets that my client has reverted the minute 0 again. >>> I have not been back into the shack. >>> Is it refreshing something and reading the default instead of the config >>> file ?. >>> Rein I have the dynamic address updating for the domain now so a look >>> see is possible again. But I will update the second machine later today >>> and see if it behaves the same way first. >>> 73 Roger >>> >>> >> removed jpskmail and .pskmail folders from second machine. >> Used the installer for 9.0.3 but before first run replaced the.jar with >> 9.0.4 version. >> filled in basic details and set bcn minute to 2. >> first beacon correct now reverted to 0 on this machine. >> I'm stumped. >> 73 Roger G6CKR >> >> >