Instead of using connect it is more effective to use ping or link to check condx with a server. Ping if you want to know which servers hear you, link to check the path to a specific server. Are your beacons being received 100%? 73, Rein PA0R > -----Ursprüngliche Nachricht----- > Von: pskmail@xxxxxxxxxxxxx > Gesendet: 31.03.08 03:30:31 > An: <pskmail@xxxxxxxxxxxxx> > Betreff: [pskmail] Re: WB5CON antenna work > > Fred > Tried you a couple of times on PSK623, 125 and 250. Saw your beacon a few > times but couldn't get connected. > 73,Alan KD4QCL > > -----Original Message----- > From: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] On > Behalf Of Fred Reiselt > Sent: Sunday, March 30, 2008 4:30 PM > To: pskmail@xxxxxxxxxxxxx > Subject: [pskmail] Re: WB5CON antenna work > > The antenna and radio work are complete. > > Hopefully the improved antenna installation will result in improved signals > > 73, > Fred > WB5CON > > Fred Reiselt wrote: > > The WB5CON pskmail server will be off and on the air part of this > > weekend. > > > > I will be raising the dipole from 12 feet to about 40 feet and > > reducing the feedline from 150 feet to about 50 feet. > > > > The TS-440SAT transceiver is also getting some chips installed for > > future computer frequency control. > > > > I'll post to the mailing list when the work is complete. > > > > 73, > > Fred > > WB5CON > > > > > > > > > > > -- http://pa0r.blogspirit.com