[pskmail] Re: SignaLink USB and CAT interface

  • From: Pär Crusefalk <per@xxxxxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Sat, 17 Dec 2011 22:38:05 +0100

Hi,

Another way is to use something like this:
http://www.ebay.com/itm/USB-CI-V-CAT-CABLE-ICOM-CT-17-IC-706-IC-7800-7700-/180771563755?pt=LH_DefaultDomain_0&hash=item2a16d328eb#ht_1517wt_907

I have two similar and they work fine.

73 de Per


lör 2011-12-17 klockan 19:41 +0100 skrev Gunnar Bulukin:
> Hi Klaus,
>  
> Thanks I will check this.
> Do you think that you could send me the pdfs? There is something wrong
> when I try to dowload them "bad encrypt dictionary"
>  
> 73 de Gunnar
> 
> 
> ______________________________________________________________________
> From: pskmail-bounce@xxxxxxxxxxxxx
> [mailto:pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of Klaus Lohmann
> Sent: Saturday, December 17, 2011 5:48 PM
> To: pskmail@xxxxxxxxxxxxx
> Subject: [pskmail] Re: SignaLink USB and CAT interface
> 
> 
> 
> Hi Gunnar,
> 
> I use this one on the boat:
> 
> http://www.box73.de/catalog/product_info.php?cPath=112_113_133&products_id=1488&osCsid=v8ffasf5o1ac96jidsi88lo974
> 
> It has one USB on the computer side, a built in soundcard and
> interfaces to virtually any TRX. The goodie: an additional USB, where
> you may connect an USB-GPS Mouse. The computer will see the soundcard
> and COMx resp. ttyx interfaces. One for CAT and one for GPS mouse.
> 
> Additionally you will have something to solder (if you like it like
> me). I don't know if an english manual is available, but the
> german .pdf has many pictures and should give you a good impression:
> 
> http://www.box73.de/catalog/pdf/BX-120.pdf?osCsid=v8ffasf5o1ac96jidsi88lo974
> 
> Complete cables for many TRX brands are also available.
> 
> 73, Klaus
> 
> 
> 
> Am 17.12.2011 15:17, schrieb Gunnar Bulukin: 
> > Hi,
> >  
> > I have bought a new SignaLink USB interface to be used on my boat.
> > Works very nice with my IC-706 in USB mode using the 6 mini din plug
> > setting and fldigi to 1000Hz.
> > So far so good, but now to my question:
> > Without a CATinterface I cannot control the rig.
> > The interface that I used befor was a CG antenna SB-2000 but that
> > does not have a built in soundcard like the SignaLink.
> > I find that using a built in soundcard works much better.
> > Does anyone have an idea what CAT interface I should use and how to
> > connect it together wit the SignaLink USB?
> >  
> > 73 de Gunnar



Other related posts: