[pskmail] Re: SignaLink USB and CAT interface

  • From: "Gunnar Bulukin" <gunnar@xxxxxxxxxx>
  • To: <pskmail@xxxxxxxxxxxxx>
  • Date: Sat, 17 Dec 2011 19:41:06 +0100

Hi Klaus,
Thanks I will check this.
Do you think that you could send me the pdfs? There is something wrong when
I try to dowload them "bad encrypt dictionary"
73 de Gunnar


From: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] On
Behalf Of Klaus Lohmann
Sent: Saturday, December 17, 2011 5:48 PM
To: pskmail@xxxxxxxxxxxxx
Subject: [pskmail] Re: SignaLink USB and CAT interface

Hi Gunnar,

I use this one on the boat:


It has one USB on the computer side, a built in soundcard and interfaces to
virtually any TRX. The goodie: an additional USB, where you may connect an
USB-GPS Mouse. The computer will see the soundcard and COMx resp. ttyx
interfaces. One for CAT and one for GPS mouse.

Additionally you will have something to solder (if you like it like me). I
don't know if an english manual is available, but the german .pdf has many
pictures and should give you a good impression:


Complete cables for many TRX brands are also available.

73, Klaus

Am 17.12.2011 15:17, schrieb Gunnar Bulukin: 

I have bought a new SignaLink USB interface to be used on my boat.
Works very nice with my IC-706 in USB mode using the 6 mini din plug setting
and fldigi to 1000Hz.
So far so good, but now to my question:
Without a CATinterface I cannot control the rig.
The interface that I used befor was a CG antenna SB-2000 but that does not
have a built in soundcard like the SignaLink.
I find that using a built in soundcard works much better.
Does anyone have an idea what CAT interface I should use and how to connect
it together wit the SignaLink USB?
73 de Gunnar

Other related posts: