Hi Rein, Great work fixing that protocol issue I tried the new client this weekend with the v09.23 server and it worked great. Got up to psk250 in NVIS conditions but not psk500. I have been thinking about the FEC option for the psk modes and I might go the way Patrick went in Multipsk with an averaging of the two bit's phases received rather than the Viterbi decoder working on hard decoded bits. I need to get Fldigi compiled for the client on Windows. Will try this week. Otherwise will have to re-install a linux version on the eee 701. I saw that you have released v24 with web page compression. That is really great. I had to download the bush fire alerts this weekend as we were camping in a large forest and it took some time to get it across. I wished I had the compression on. Thanks Rein. I will try this this week. All the best, 73s, John On Fri, Nov 13, 2009 at 7:12 PM, Rein Couperus <rein@xxxxxxxxxxxx> wrote: > Fine business John, > > have you found the new client image in alpha? That solves the > missing 'missing blocks' issue... Took me quite some testing to find it, > but the solution was easy... somehow the client did > not properly update the 'good block' variable. After the change I cannot > see any difference with the original linux client any more, and > psk500 transfers are UNBELIEVABLY fast now as soon as there > is propagation. Which means we can increase the size of the documents > transferred :) > > Now working on adding compressed website transfer... > > 73, > > Rein PA0R > > >> -----Ursprüngliche Nachricht----- >> Von: "John Douyere" <vk2eta@xxxxxxxxx> >> Gesendet: 13.11.09 04:57:38 >> An: pskmail@xxxxxxxxxxxxx >> Betreff: [pskmail] Re: Server update > > >> Rein, >> >> Installed and did some tests. It is looking really good. I like the >> rsid sequencing. It works well. >> >> The only thing I noticed is that it does not return the RXrsid ON >> after a disconnect. >> >> I just added one line in the scanner section, before the scan mode >> tests, to systematically re-set RX rsid on and that seems to do the >> trick. But I think we need a re-set of RxRSID after disconnect too in >> case someone does not use the scan option. >> >> Also did a lot of testing of Fldigi's RSID receiving and there is >> definitely an issue regarding the sensitivity BEFORE the data is sent. >> >> If I enable post-frame RSID transmission, I get a much higher rate of >> mode change than by using the pre-frame one only. >> >> Something to look into since it is not practical and effective to use >> the post-frame RSID transmission (the data is already gone and there >> is an extra 1.5 sec delay after the data is sent). >> >> I will have a look at the RSID code in Fldigi to see if there is a >> difference between the two and will refer to Dave about this for help. >> >> Going bush this weekend so should have a fair bit of testing done. >> >> 73s, >> >> John >> >> On Thu, Nov 12, 2009 at 3:09 AM, Rein Couperus <rein@xxxxxxxxxxxx> wrote: >> > A new server is available at: >> > http://hermes.esrac.ele.tue.nl/pskmail/alpha. >> > >> > Version 0.9.23 fixes the 'already connected to xxx' bug, and >> > also handles PSK500 + RSID + scanning correctly. >> > It should be used with fldigi-3.13AZ (also in the same directory). >> > >> > 73, >> > >> > Rein PA0R >> > >> > -- >> > http://pa0r.blogspirit.com >> > >> > >> >> > > -- > http://pa0r.blogspirit.com > >