Hi, Tested today: 1. Timing for THOR8 is broken. The server keeps timing out well before the client has a chance to respond. I am petty sure I submitted some correction for this in the past but it seems to have come back. 2. Without any APRS mapper/client, typing directly in the message line in the Java client if I type any APRS message I get a server ack ("QSL...etc...") but no posting on APRS. I checked both findu.com anc aprs.fi without success. I was monitoring my server remotely and I could see all the traffic and the server log. So tx/rx was fine. I tried with and without ssid, same result. Is it only my setup? Regards, John On Mon, Jan 3, 2011 at 3:16 AM, Rein Couperus <rein@xxxxxxxxxxxx> wrote: > There are new alpha images of server and client... > > Server-1.0.32: > * Made the server compatible with xastir clients on the internet > * Changed aprs message formats for compatibility with picky map clients > * Added acknowledgement to the aprs routine so we don't send messages 8x on HF > * Added more functions to the DTN routine, so policy for resume of partial > up/downloads can be set by the client. > > jPSKmail-0.8.6: > * Get ports button on Device tab > * Changed File menu, added radio buttons to set up/download plolicy > * Lots of work on aprs messages, to cater for timing difference between > internet and pskmail. > * Messages from local map client now routed correctly > * Enhanced Igate functions; if Igate is connected to an aprs server on the > net, > xastir will show all traffic to 'PSKAPRS', so you have a local copy of the > 'pskmailers' web page... > > Pse send test reports to this mailing list, after alpha test the stuff will be > officially released... > > Server ops: > Pse upgrade to 1.0.32, to prevent ack and message repeat chaos on the > frequency... > The new server will only send messages to HF when the adressee is linked. > Messages from xastir to pskmail now works flawlessly! > > 73, > > Rein PA0R > > -- > http://pa0r.blogspirit.com > >