[pskmail] Re: Server 0.9.21 issues

  • From: Pär Crusefalk <per@xxxxxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Fri, 16 Oct 2009 11:09:42 +0200

Hi,

We've already addressed that issue. I have his entire .pskmail folder
here and its working now, at least for me. I'm waiting for confirmation
from Eric, guess its night there now...

73!

fre 2009-10-16 klockan 10:55 +0200 skrev Rein Couperus:
> Hi Eric, 
> 
> position :@132119z0035.99NP00082.13W puts you on 0 degrees, 35.99 minutes 
> north,
> zero degrees, 82,13 minutes West, which could well be in Ghana.
> 
> Pse read the instructions for the APRS posit format in pskmailrc.pl...,
> you are a factor of 100 wrong...
> 
> I will correct the errors in 0.9.21 and issue a new version with the bugs 
> fixed (but first try to get hermes back up)..
> 
> 73,
> 
> Rein Pa0R
> 
> > -----Ursprüngliche Nachricht-----
> > Von: "Pär Crusefalk" <per@xxxxxxxxxxxx>
> > Gesendet: 15.10.09 08:51:50
> > An: pskmail@xxxxxxxxxxxxx
> > Betreff: [pskmail] Re: Server 0.9.21 issues
> 
> 
> > Hi Eric,
> > 
> > I did not see that aprs error and my freqs.txt is just like yours but I cant
> > recreate that problem.
> > A wild guess is that something in pskmailrc.pl is causing it. Would you mind
> > sending your pskmailrc.pl and freqs.txt to me so that I can reproduce the
> > error? If you are ok with that then pse send those off the list.
> > 
> > 73 de Per, sm0rwo
> > 
> > P.s. Thanks for not giving up despite these issues.
> > 
> >  
> >  
> > 
> > 
> > ----------------original message-----------------
> > Från: "Eric W. Davenport" kz5ed@xxxxxxxxxx
> > Till: pskmail@xxxxxxxxxxxxx
> > Datum: Wed, 14 Oct 2009 18:06:48 -0400
> > -------------------------------------------------
> >  
> >  
> > > Per
> > > 
> > > I think I found another one.
> > > if the freq.txt second line reads
> > > DOMINOEX11,PSK250,PSK125,PSK63,DOMINOEX8
> > > it throws an exception on line 618 of ARQ.PM stating that $soh_time is 
> > > not initialized. From my read of the code it is not, but I am not a perl 
> > > programmer so I may be reading it wrong.
> > > if the freq.txt second line reads
> > > DOMINOEX11,PSK120,PSK125,PSK63,DOMINOEX8
> > > Everything functions correctly
> > > 
> > > I think that the APRS is broken also.
> > > My raw reports are showing up in some places as correct but on intramar
> > > my longitude is
> > > 
> > >   001?22'7?W
> > > 
> > > on aprs.fi
> > > 2009-10-13 00:32:18 UTC: *KZ5ED
> > > 
> > > *>PSKAPR,TCPIP*,qAC,T2TUENL
> > > :@130032z0035.99NP00082.13W& 
> > > 
> > > 
> > > PSKmail-0.8 PSK250 *[Invalid uncompressed location]
> > > on wulfden Raw Data
> > > *KZ5ED>PSKAPR,TCPIP*,qAC,T2TUENL:@132119z0035.99NP00082.13W& 
> > > PSKmail-0.8
> > > PSK250 but it shows me in Ghana
> > > 
> > > I have changed my ssid to KZ5ED-5
> > > 
> > > My 2 cents
> > > 
> > > 73
> > > 
> > > Per Crusefalk wrote:
> > >> As discussed today there are a few problems with the server version
> > >> 0.9.21. I just want to write them down here in case someone else wants
> > >> to try that particular version. Also, writing them down makes them
> > >> easier to remember and correct (and issue a corrected version).
> > >>
> > >> 1. Launching pskmail_server after install gives an error: "Cannot find
> > >> executable."
> > >>
> > >> This is caused by rflinkserver.pl is installed with improper
> > >> permissions. To correct it issue:
> > >> "sudo chmod 755 /usr/local/share/pskmail_server/rflinkserver.pl"
> > >>
> > >> 2. File "routes" is missing.
> > >>
> > >> To fix that just issue: "touch ~/.pskmail/routes"
> > >>
> > >> 3. Typo in arq.pm, missing comment start causes error during scan.
> > >>
> > >> To fix that edit line 3834 and make it look like:
> > >> "$connect_cps = 2; #don't know this mode so have extended timouts"
> > >>
> > >> 73 de Per, sm0rwo
> > >>
> > >>
> > >>
> > >>
> > >> 
> > > 
> > > 
> > > -- 
> > > KZ5ED
> > > Eric
> > > ewdavenport@xxxxxxxxxx
> > > 
> > > 
> > > 
> > > 
> > > 
> > 
> > 
> > 
> > 
> 


Other related posts: