> -----Ursprüngliche Nachricht----- > Von: pskmail@xxxxxxxxxxxxx > Gesendet: 24.10.07 02:26:32 > An: pskmail@xxxxxxxxxxxxx > Betreff: [pskmail] Server 0.5 I got it working. I did a > work-around for the problems I was having with fldigi; I bypassed my RX > audio attenuation resistor pad and plugged the rig audio into the 'line > in' jack instead of the mic jack. For some reason the audio level > going into the mic jack just isn't enough for fldigi 1.37 and newer, > with the line input it works fine. > > I noticed one issue with server 0.5. It does a disconnect packet upon > start up, just like 0.4 did, however it doesn't include a callsign in > the packet. When I watched a newer client connect up to my server a > couple weeks ago before I went on two trips, I noticed the callsign > identification was gone from most (all?) packets other than the connect > attempt, if I recall correctly. I'm not sure of the regulations in > Europe, but in the US we need to identify at the beginning and end of a > QSO, and also every 10 minutes during a QSO. > > I modified arq.pm on my server to include the server callsign in the > packets. Here's the diff: > > 242c242 > < $StartHeader = sprintf("%c", '1'); > --- > > > $StartHeader = sprintf("%s%c", $ServerCall, '1'); > > 73 > Goody > K3NG > > -- Blog: http://thek3ngreport.blogspot.com/ > -- http://pa0r.blogspirit.com