[pskmail] SV: Re: SV: Re: SA6BQZ

  • From: "Gunnar Bulukin" <gunnar@xxxxxxxxxx>
  • To: <pskmail@xxxxxxxxxxxxx>
  • Date: Sat, 26 Feb 2011 10:49:26 +0100

Hej Rein,

I will check the freqs.txt.

Should/does the settings in freq.txt affect pskserver when not using Hamlib?
On my IC-707 I have the settings TX10146,2 USB and RX10147 CW-N 500Hz,
should the TX settings be the same in freqs.txt?

73 de Gunnar  

-----Ursprungligt meddelande-----
Från: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] För
Rein Couperus
Skickat: den 24 februari 2011 22:29
Till: pskmail@xxxxxxxxxxxxx
Ämne: [pskmail] Re: SV: Re: SA6BQZ

Hej Gunnar,

what you are describing looks like a config error in the freqs.txt file.

Make sure the modes in the file are all PSK500R... like:

This file is in ~/.pskmail/qrg

I have not been able to receive your beacons, but that is probably  due to a
high QRM level for most of the day.


Rein EA/PA0R/M


I will check the settings again. Now I am TX on 10146,2 USB  and RX on 10147
CW-N 500Hz filter 35W.
The TX is heard! I check with SM6FGZ that had a signal (S9) at  minute 0 but
having no pskmail/fldigi installed he could not give me more  info.
I can not control the IC-707 via Hamlib but I am getting an  IC-706
beginning of next week maybe that will be better.
One thing that I talked to Pär about is that it sometimes  changes to PSK250
even if the configfile pskmailrc.pl is set to $Defaultmode = "PSK500";
One thing for sure: to be able to get pskmail  working you should not be an
"amateur" like me;-) but it newer to late to learn  new things and quoting
The Beatles " Oh I get by with a little help from my  friends"
So far more than 3 days just getting everything  running and without 100%
good result!! 
I will be back for  sure!!!
73 Gunnar SA6BQZ

Från: pskmail-bounce@xxxxxxxxxxxxx  [mailto:pskmail-bounce@xxxxxxxxxxxxx]
Skickat: den 23  februari 2011 23:50
Till: pskmail@xxxxxxxxxxxxx
Ämne: [pskmail] Re: SA6BQZ

Not tried yet but have not seen a beacon yet either.
Igate is on  even when I am not beaconing.
73 Roger G6CKR
On 23/02/2011 17:33, Gunnar  Bulukin wrote:

Hi    all,
I have put up a    new server has anyone been able to ping it?
Best    regards
KB Vågspel
Gunnar Bulukin
Tel +46(0)31 962130
Mob +46(0)31 7601501
SMS +46(0)705 933051
This message has been scanned    by Avast for Microsoft Outlook
P Please consider your environmental responsibility. Before printing    this
e-mail ask yourself:- "Do I need a hard copy?"

Other related posts: