HI Ed, I think this is partially reversed. I think you need to click on 14.075 in the fldigi readout above the waterfall, and then click the QSY button. This will put you on frequency, but for USB the readout on the radio will be 14.073.5. (1500 hz lower). Actually the red cursor square is on the sweet spot when first going into fldigi, so you don't get a change in frequency until you put the red cursor square at a different frequency and then press QSY. This might be what you meant to say. Steve, W2MY Ed said: _____________________________________________________________ Steve, let fldigi handle the offset for you. Its really pretty easy. configure > modems > misc You will see 3 choices, enter 1500 in the last box. Now save the configuration. Put the rig dial on 14.075, kick in the filter and then hit the "qsy" button....that should move your tx/rx to the "sweet spot" and adjust the readout on the rig accordingly with no input from you needed. Let us know how it works. Ed W3NR -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.15.29/608 - Release Date: 12/29/2006 8:22 AM