I have not unpacked that file! :D I feel stupid again :D Tarmo 2012/12/27 Gunnar Bulukin <gunnar@xxxxxxxxxx> > ** > Short memory!! You have to unzip the file 1.5.10 first ;-) > //g > > ------------------------------ > *From:* pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] > *On Behalf Of *Gunnar Bulukin > *Sent:* Thursday, December 27, 2012 12:45 PM > > *To:* pskmail@xxxxxxxxxxxxx > *Subject:* [pskmail] Re: Raspberry Pi and Pskmail Client > > Btw, you have to start fldigi first!!! > //gunnar > > ------------------------------ > *From:* pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] > *On Behalf Of *Gunnar Bulukin > *Sent:* Thursday, December 27, 2012 12:43 PM > *To:* pskmail@xxxxxxxxxxxxx > *Subject:* [pskmail] Re: Raspberry Pi and Pskmail Client > > Tarmo, > > You should not execute the file. > 1. Go into the 1.5.10 and set the jar file under permissions to executible. > 2. Do the same thing to the files under Lib > 3. open the jar file under 1.51.10 and wait, takes around 2 minutes to > start. > > Can I call you on Skype??? > > //gunnar > > ------------------------------ > *From:* pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] > *On Behalf Of *Tarmo Huttunen > *Sent:* Thursday, December 27, 2012 12:36 PM > *To:* pskmail@xxxxxxxxxxxxx > *Subject:* [pskmail] Re: Raspberry Pi and Pskmail Client > > Yes, I have tried powered hub also...even made well regulated power supply > myself so my guess is power was not problem...by the way I have a feeling > that usb problems have been less since I updated Raspberry's os. (But audio > receive quality is still a bit poor) > > Gunnar, By the way... maybe it is my bat english but I am little confused > about your instruction. I have download 1.5.10 > From http://www.crusefalk.se/jpskmailinstall/ > > But it is executable file, when I try to execute it, pi gets busy for a > while but nothing seems to happend. If I try executing from root terminal, > it says "binary file cannot be executed"... so I cant find any "jpskmail > lib" so I can not open javapskmail.jar :D I feel stupid :D > > Should this installer be runnable and make some directory containing those > javapskmail.jar > etc. ? (I have made permission to run this file.) This is what I meant, I > can not find 1.5.10 jar files. > > I can see previous version I have tried while ago have been jpskmail > installer 1.6.10, it do exactly same, nothing:) > > Tarmo, OH6ECF > > 2012/12/27 Larry Levesque <ka1vgm@xxxxxxxxx> > >> I suspect it is a power issue. >> >> Try plugging a powered usb hub into the PI and the sound card into that. >> >> The recommended power supply is at least 1amp for the Pi but it only >> supports powering a level less than that for devices. >> >> Other people with similar problems have cured it by replacing the power >> supply or using the powered usb hub. >> >> Larry Levesque >> KA1VGM >> Cheshire County EC >> NHARES >> >> >> On Wed, Dec 26, 2012 at 3:23 PM, Tarmo Huttunen <tarmopaha@xxxxxxxxx>wrote: >> >>> Well, I haven't got jpskmail working on raspberry yet. Maybe because >>> I didn't find 1.5.10 jar files :D So I tried 2.0.22. Suppose I just make >>> something wrong... >>> >>> I have noticed about pi and fldigi, I cannot get WEFAX received as well >>> as with ordinary laptop, with same usb soundcard (cheap dongle). Picture >>> is not as good. I think "slant" is not stable when using raspberry pi. But >>> it somewhat works, fun! Also tried receiving NAVTEX, it works also. I have >>> received quite a lot of 518 khz NAVTEX from Mediterranean Sea here in inner >>> Finland with pi. >>> >>> I suppose it is some issue on usb in pi, not sure. (could also be >>> something simple like dirty power or ground loop...) Also soundcard gets >>> grazy quite often when used with pi, and gets only fuzzy gibberish on >>> waterwall. >>> By the way, It have never worked if I also have network connected, wifi >>> or ethernet. That is why I mostly susbect usb driver problem. >>> >>> >>> Tarmo OH6ECF >>> >>> >>> 2012/12/25 Gunnar Bulukin <gunnar@xxxxxxxxxx> >>> >>>> ** >>>> Hi, >>>> >>>> Have tested with Pskmail client 1.5.10 and fldigi on Pi B (512). So far >>>> it works but CPU is 90%. >>>> Will test together with the IC-7200 when i have some more time. >>>> How to test: >>>> From http://www.crusefalk.se/jpskmailinstall/ >>>> Follow instruktions for Ubuntu to install fldigi and download 1.5.10 >>>> make jar files allowed to be executed even those in the LIB (don´t know if >>>> that is a must) >>>> After starting fldigi go to the jpskmail lib and open javapskmail.jar, >>>> it will take some time to start!! >>>> >>>> It would me very nice if anyone that has a working rig and a Pi close >>>> by could do some test and see if it works!! >>>> >>>> 73 de Gunnar >>>> >>> >>> >> >