[pskmail] Re: Raspberry Pi and Pskmail Client

  • From: Tarmo Huttunen <tarmopaha@xxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Thu, 27 Dec 2012 23:09:28 +0200

Thanks again Gunnar, jpskmail started now on raspberry...

73, Tarmo OH6ECF

2012/12/27 Gunnar Bulukin <gunnar@xxxxxxxxxx>

> **
> It was the 1.5.10 only that you should download and unzip! You are trying
> to unzip an installationfile.
> For Pi use this link.
> http://www.crusefalk.se/jpskmailinstall/jpskmail-1.5.10.zip
>
> For Ubuntu use the installationfile and make it executible and the install
> by moving to the upacked lib and start the installation with ./INSTALL.
> Good luck!
> //g
>
>  ------------------------------
> *From:* pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx]
> *On Behalf Of *Tarmo Huttunen
> *Sent:* Thursday, December 27, 2012 8:36 PM
>
> *To:* pskmail@xxxxxxxxxxxxx
> *Subject:* [pskmail] Re: Raspberry Pi and Pskmail Client
>
> Eh...I get this from terminal when I try to unzip:
>
> root@raspberrypi:/home/pi# unzip jPSKmail-1.5.10-Linux-x86-Install
> Archive:  jPSKmail-1.5.10-Linux-x86-Install
>   End-of-central-directory signature not found.  Either this file is not
>   a zipfile, or it constitutes one disk of a multi-part archive.  In the
>   latter case the central directory and zipfile comment will be found on
>   the last disk(s) of this archive.
> note:  jPSKmail-1.5.10-Linux-x86-Install may be a plain executable, not an
> archive
> unzip:  cannot find zipfile directory in one of
> jPSKmail-1.5.10-Linux-x86-Install or
>         jPSKmail-1.5.10-Linux-x86-Install.zip, and cannot find
> jPSKmail-1.5.10-Linux-x86-Install.ZIP, period.
>
> So what now :D I have a feeling that my file is not same as yours, Gunnar
> :D
>
> 2012/12/27 Tarmo Huttunen <tarmopaha@xxxxxxxxx>
>
>>  I have not unpacked that file!  :D I feel stupid again :D
>>
>> Tarmo
>>
>>
>> 2012/12/27 Gunnar Bulukin <gunnar@xxxxxxxxxx>
>>
>>> **
>>> Short memory!! You have to unzip the file 1.5.10 first ;-)
>>> //g
>>>
>>>  ------------------------------
>>>  *From:* pskmail-bounce@xxxxxxxxxxxxx [mailto:
>>> pskmail-bounce@xxxxxxxxxxxxx] *On Behalf Of *Gunnar Bulukin
>>> *Sent:* Thursday, December 27, 2012 12:45 PM
>>>
>>> *To:* pskmail@xxxxxxxxxxxxx
>>> *Subject:* [pskmail] Re: Raspberry Pi and Pskmail Client
>>>
>>>   Btw, you have to start fldigi first!!!
>>> //gunnar
>>>
>>>  ------------------------------
>>> *From:* pskmail-bounce@xxxxxxxxxxxxx [mailto:
>>> pskmail-bounce@xxxxxxxxxxxxx] *On Behalf Of *Gunnar Bulukin
>>> *Sent:* Thursday, December 27, 2012 12:43 PM
>>> *To:* pskmail@xxxxxxxxxxxxx
>>> *Subject:* [pskmail] Re: Raspberry Pi and Pskmail Client
>>>
>>>  Tarmo,
>>>
>>> You should not execute the file.
>>> 1. Go into the 1.5.10 and set the jar file under permissions to
>>> executible.
>>> 2. Do the same thing to the files under Lib
>>> 3. open the jar file under 1.51.10 and wait, takes around 2 minutes to
>>> start.
>>>
>>> Can I call you on Skype???
>>>
>>> //gunnar
>>>
>>>  ------------------------------
>>> *From:* pskmail-bounce@xxxxxxxxxxxxx [mailto:
>>> pskmail-bounce@xxxxxxxxxxxxx] *On Behalf Of *Tarmo Huttunen
>>> *Sent:* Thursday, December 27, 2012 12:36 PM
>>> *To:* pskmail@xxxxxxxxxxxxx
>>> *Subject:* [pskmail] Re: Raspberry Pi and Pskmail Client
>>>
>>> Yes, I have tried powered hub also...even made well regulated power
>>> supply myself so my guess is power was not problem...by the way I have a
>>> feeling that usb problems have been less since I updated Raspberry's os.
>>> (But audio receive quality is still a bit poor)
>>>
>>> Gunnar, By the way... maybe it is my bat english but I am little
>>> confused about your instruction. I have download 1.5.10
>>>  From http://www.crusefalk.se/jpskmailinstall/
>>>
>>> But it is executable file, when I try to execute it, pi gets busy for a
>>> while but nothing seems to happend. If I try executing from root terminal,
>>> it says "binary file cannot be executed"... so I cant find any  "jpskmail
>>> lib"  so I can not  open javapskmail.jar :D I feel stupid :D
>>>
>>> Should this installer be runnable and make some directory containing
>>> those javapskmail.jar etc. ? (I have made permission to run this file.)
>>> This is what I meant, I can not find 1.5.10 jar files.
>>>
>>> I can see previous version I have tried while ago have been jpskmail
>>> installer 1.6.10, it do exactly same, nothing:)
>>>
>>> Tarmo, OH6ECF
>>>
>>>  2012/12/27 Larry Levesque <ka1vgm@xxxxxxxxx>
>>>
>>>> I suspect it is a power issue.
>>>>
>>>> Try plugging a powered usb hub into the PI and the sound card into that.
>>>>
>>>> The recommended power supply is at least 1amp for the Pi but it only
>>>> supports powering a level less than that for devices.
>>>>
>>>> Other people with similar problems have cured it by replacing the power
>>>> supply or using the powered usb hub.
>>>>
>>>> Larry Levesque
>>>> KA1VGM
>>>> Cheshire County EC
>>>> NHARES
>>>>
>>>>
>>>> On Wed, Dec 26, 2012 at 3:23 PM, Tarmo Huttunen <tarmopaha@xxxxxxxxx>wrote:
>>>>
>>>>> Well, I haven't got jpskmail working on raspberry yet. Maybe because
>>>>> I didn't find 1.5.10 jar files :D So I tried 2.0.22. Suppose I just make
>>>>> something wrong...
>>>>>
>>>>> I have noticed about pi and fldigi, I cannot get WEFAX received as
>>>>> well as with ordinary laptop,  with same usb soundcard (cheap dongle).
>>>>> Picture is not as good. I think "slant" is not stable when using raspberry
>>>>> pi. But it somewhat works, fun!  Also tried receiving NAVTEX, it works
>>>>> also. I have received quite a lot of 518 khz NAVTEX from Mediterranean Sea
>>>>> here in inner Finland with pi.
>>>>>
>>>>> I suppose it is some issue on usb in pi, not sure. (could also be
>>>>> something simple like dirty power or ground loop...) Also soundcard gets
>>>>> grazy quite often when used with pi, and gets only fuzzy gibberish on
>>>>> waterwall.
>>>>> By the way, It have never worked if I also have network connected,
>>>>> wifi or ethernet. That is why I mostly susbect usb driver problem.
>>>>>
>>>>>
>>>>> Tarmo OH6ECF
>>>>>
>>>>>
>>>>> 2012/12/25 Gunnar Bulukin <gunnar@xxxxxxxxxx>
>>>>>
>>>>>> **
>>>>>> Hi,
>>>>>>
>>>>>> Have tested with Pskmail client 1.5.10 and fldigi on Pi B (512). So
>>>>>> far it works but CPU is 90%.
>>>>>> Will test together with the IC-7200 when i have some more time.
>>>>>> How to test:
>>>>>> From http://www.crusefalk.se/jpskmailinstall/
>>>>>> Follow instruktions for Ubuntu to install fldigi and download 1.5.10
>>>>>> make jar files allowed to be executed even those in the LIB (donĀ“t know 
>>>>>> if
>>>>>> that is a must)
>>>>>> After starting fldigi go to the jpskmail lib and open
>>>>>> javapskmail.jar, it will take some time to start!!
>>>>>>
>>>>>> It would me very nice if anyone that has a working rig and a Pi close
>>>>>> by could do some test and see if it works!!
>>>>>>
>>>>>> 73 de Gunnar
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>

Other related posts: