[pskmail] Re: No Connection

  • From: Kyle Kienapfel <doctor.whom@xxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Sun, 21 Aug 2011 14:58:03 -0700

Hi Darrel,
How about you have the pskmail server connect a SSH tunnel to one of your
computers automatically?

openvpn might be a better idea. Bit more trouble to set up initially but
full of options

-Kyle

On Sun, Aug 21, 2011 at 2:01 PM, <ve7cus@xxxxxxx> wrote:

> The server is behind a router to which I have no control. Is there a way to
> access the server computer through it?
>
> Darrel
>
> On 2011-08-21, at 1:27 PM, Rein Couperus wrote:
>
> No vnc connection?
> It is easy to install Xtightvnc and run fldigi and the server on e.g.
> display :10
> This is unvaluable when you want to debug something...
> * Install Xtightvnc
> * 'vncserver :10'
> then you can start, monitor and stop the programs from home:
> vncviewer <address>:10
>
> Rein
>
> --
> http://pa0r.blogspirit.com
>
> ------------------------------
> *Von:* ve7cus@xxxxxxx
> *Gesendet:* Aug 21, 2011 10:12:37 PM
> *An:* pskmail@xxxxxxxxxxxxx
> *Betreff:* [pskmail] Re: No Connection
>
> There is absolutely no response from the server. I might go get to the
> server and bring it here.
>
> Darrel
>
> On 2011-08-21, at 12:51 PM, Rein Couperus wrote:
>
> Hmmm ...  a bit difficult to debug, as it is working perfectly here...
> Does the server say anything?
>
> Rein
>
>
> --
> http://pa0r.blogspirit.com
>
> ------------------------------
> *Von:* ve7cus@xxxxxxx
> *Gesendet:* Aug 21, 2011 9:26:00 PM
> *An:* pskmail@xxxxxxxxxxxxx
> *Betreff:* [pskmail] Re: No Connection
>
> Actually, I have tried several modes mainly PSK500R with the same results.
> I also added PSK250 to the table and still it's a no go.
>
>
> Darrel
>
> On 2011-08-21, at 12:16 PM, Rein Couperus wrote:
>
> After some analysis I see that you are using a mode (PSK250) which is not
> in the
> default mode table.
> You could change the mode table to:
> PSK250-PSK250R-PSK125R-THOR22-THOR11
> and try again... this is one of the combinations I have succesfully
> tested...
>
> Rein PA0R
>
>
>
>

Other related posts: