[pskmail] Re: No Connection

  • From: ve7cus@xxxxxxx
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Sun, 21 Aug 2011 14:01:00 -0700

The server is behind a router to which I have no control. Is there a way to 
access the server computer through it?

Darrel

On 2011-08-21, at 1:27 PM, Rein Couperus wrote:

> No vnc connection?
> It is easy to install Xtightvnc and run fldigi and the server on e.g. display 
> :10
> This is unvaluable when you want to debug something...
> * Install Xtightvnc
> * 'vncserver :10'
> then you can start, monitor and stop the programs from home:
> vncviewer <address>:10
> 
> Rein
> 
> --
> http://pa0r.blogspirit.com
> 
> Von: ve7cus@xxxxxxx
> Gesendet: Aug 21, 2011 10:12:37 PM
> An: pskmail@xxxxxxxxxxxxx
> Betreff: [pskmail] Re: No Connection
> 
> There is absolutely no response from the server. I might go get to the server 
> and bring it here.
>  
> Darrel
>  
> On 2011-08-21, at 12:51 PM, Rein Couperus wrote:
> 
> Hmmm ...  a bit difficult to debug, as it is working perfectly here...
> Does the server say anything?
> 
> Rein
> 
> 
> --
> http://pa0r.blogspirit.com
> 
> Von: ve7cus@xxxxxxx
> Gesendet: Aug 21, 2011 9:26:00 PM
> An: pskmail@xxxxxxxxxxxxx
> Betreff: [pskmail] Re: No Connection
> 
> Actually, I have tried several modes mainly PSK500R with the same results. I 
> also added PSK250 to the table and still it's a no go.
>  
>  
> Darrel
> 
> On 2011-08-21, at 12:16 PM, Rein Couperus wrote:
> 
> After some analysis I see that you are using a mode (PSK250) which is not in 
> the
> default mode table.
> You could change the mode table to:
> PSK250-PSK250R-PSK125R-THOR22-THOR11
> and try again... this is one of the combinations I have succesfully tested...
> 
> Rein PA0R
> 

Other related posts: