[pskmail] Re: New server update (Fred)

  • From: John Douyere <vk2eta@xxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Wed, 23 Dec 2009 10:36:54 +1100

Russell,

Thank you for your response. Let's open up the question below for comments.

Regards,

John

On Wed, Dec 23, 2009 at 10:23 AM, John Douyere <vk2eta@xxxxxxxxx> wrote:
> Russel,
>
> I understand. I think we could ask the Fldigi group for a solution to
> that PSK500(R) issue as it is best done in Fldigi rather than Pskmail.
>
> I think an option in the PSK and mail configuration tab saying
> "Disable PSK500 modes when used a modem" would do fine.
>
> If a request by pskmail server or client or from the radio to switch
> to PSK500 modes arises, it should go back to the closest thing: PSK250
> or PSK250R depending on the request.
>
> Would that make sense?
>
> Regards,
>
> John
>
> On Wed, Dec 23, 2009 at 10:12 AM, Russell Blair
> <russell_blair86@xxxxxxxxx> wrote:
>> Thanks John, for now my server is Puppy mail v0.9.22 and I am running fldig 
>> 0.3.12 but when I am in client mode I use fldigi-3.13BH and jPskmail 
>> 0.4.0.2. The group is working on a fix for the server not to Tx RISD for 
>> PSK500 mode in the U.S. Fred has been hard at it all day.
>>
>> Russell NC5O
>>  1- Whoever said nothing is impossible never tried slamming a revolving door!
>> 2- A government big enough to give you everything you want, is strong enough 
>> to take everything you have.
>> - Thomas Jefferson
>>
>>
>> " IN GOD WE TRUST "
>>
>>
>> Russell Blair (NC5O)
>> Skype-Russell.Blair
>> Hell Field #300
>> DRCC #55
>> 30m Dig-group #693
>>
>>
>>
>> ----- Original Message ----
>> From: John Douyere <vk2eta@xxxxxxxxx>
>> To: pskmail@xxxxxxxxxxxxx
>> Sent: Tue, December 22, 2009 4:56:57 PM
>> Subject: [pskmail] Re: New server update (Fred)
>>
>> Hello Russel and Fred,
>>
>> Just a couple of points which may be of help:
>>
>> Fred, I also had issues with RSID not switching sometimes. I noticed
>> that selecting "search entire passband" in the ID configuration of
>> Fldigi can help with the decoding. I can't explain why, but it did
>> help in my case.
>>
>> Also sometimes I noticed that de-selecting and re-selecting the
>> receive RSID button on Fldigi seems to jog it into play and it receive
>> RSIDs immediately rather than after two attempts.
>>
>> Russell, it is ok for the server to be "wandering" on other modes
>> since the client now always sends the connecting mode RSID before the
>> connect. Therefore it will re-connect on any mode. And that even if it
>> moved away from the default mode.
>>
>> On the other hand if you don't have RSID on, connections can only be
>> made on the default mode.
>>
>> My suggestion is to leave RSID on and let it change at will. The only
>> constraint then is that if someone uses an old version of Pskmail and
>> Fldigi they will have to connect on the current (and therefore
>> unknown) mode.
>>
>> Hope this helps,
>>
>> Best regards,
>>
>> John
>>
>>
>>
>> On Wed, Dec 23, 2009 at 3:20 AM, Russell Blair
>> <russell_blair86@xxxxxxxxx> wrote:
>>> Ok Well the band is getting long your just about gone for me, I'm not sure 
>>> who is talking to who some time, If I start fldigi-3.13BH and it shows 
>>> PSK31 as the mode, and then I start jPSKmail-0.4.0.2 client and its set for 
>>> PSK250, nothing changes or I'm not sure if it should, But I give it to for 
>>> hanging in there with all this, and all the help thats around it will get 
>>> all cleared up.
>>>
>>> Russell
>>>  1- Whoever said nothing is impossible never tried slamming a revolving 
>>> door!
>>> 2- A government big enough to give you everything you want, is strong 
>>> enough to take everything you have.
>>> - Thomas Jefferson
>>>
>>>
>>> " IN GOD WE TRUST "
>>>
>>>
>>> Russell Blair (NC5O)
>>> Skype-Russell.Blair
>>> Hell Field #300
>>> DRCC #55
>>> 30m Dig-group #693
>>>
>>>
>>>
>>> ----- Original Message ----
>>> From: Fred Reiselt <freiselt@xxxxxxxxxxxxx>
>>> To: pskmail@xxxxxxxxxxxxx
>>> Sent: Tue, December 22, 2009 10:12:06 AM
>>> Subject: [pskmail] Re: New server update (Fred)
>>>
>>> Hi Russell,
>>>
>>> The server won't ask for you to update the server if it already has you in 
>>> its database. You can update it anytime you want, if your mail info changes.
>>>
>>> That was probably me playing with the server. I'm still stuck on my fldigi 
>>> not working properly with RSID. The server will send TxID and change 
>>> speeds, but I can't get my client to follow the speed change, even though 
>>> RxID is on. jPSKmail is properly setting RxID and TxID.
>>>
>>> I have tried making it work with just two fldigi's running on two machines, 
>>> without pskmail_server or jPSKmail running. I've changed from my compiled 
>>> fldigi to a pre-compiled binary. I've upgraded to fldigi 3.13BJ. Nothing is 
>>> checked in the ID tab on fldigi configuration. So far nothing. I'm sure I'm 
>>> gonna feel real stupid when I find the problem :>)
>>>
>>> 73,
>>> Fred - wb5con
>>>
>>> Russell Blair wrote:
>>>> Fred, the last few times I connect to your server it never ask for me to 
>>>> update the server, So the last time I just sent it and you came back with 
>>>> it had been updated. Someone today was TxRISD and switched me to PSK500R. 
>>>> So I turned off the RxRISD ..
>>>>
>>>> Russell NC5O
>>>>  1- Whoever said nothing is impossible never tried slamming a revolving 
>>>>door!
>>>> 2- A government big enough to give you everything you want, is strong 
>>>> enough to take everything you have. - Thomas Jefferson
>>>>
>>>> " IN GOD WE TRUST "
>>>>
>>>> Russell Blair (NC5O)
>>>> Skype-Russell.Blair
>>>> Hell Field #300
>>>> DRCC #55
>>>> 30m Dig-group #693
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>

Other related posts: