[pskmail] Re: New server update (Fred)

  • From: Russell Blair <russell_blair86@xxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Tue, 22 Dec 2009 15:30:02 -0800 (PST)

John speaking for me only thats fine, it needs to be talked over with the 
others, Im just a user and a part time provider.

Russell 
 1- Whoever said nothing is impossible never tried slamming a revolving door!
2- A government big enough to give you everything you want, is strong enough to 
take everything you have. 
- Thomas Jefferson 


" IN GOD WE TRUST " 


Russell Blair (NC5O)
Skype-Russell.Blair
Hell Field #300
DRCC #55
30m Dig-group #693 



----- Original Message ----
From: John Douyere <vk2eta@xxxxxxxxx>
To: pskmail@xxxxxxxxxxxxx
Sent: Tue, December 22, 2009 5:23:58 PM
Subject: [pskmail] Re: New server update (Fred)

Russel,

I understand. I think we could ask the Fldigi group for a solution to
that PSK500(R) issue as it is best done in Fldigi rather than Pskmail.

I think an option in the PSK and mail configuration tab saying
"Disable PSK500 modes when used a modem" would do fine.

If a request by pskmail server or client or from the radio to switch
to PSK500 modes arises, it should go back to the closest thing: PSK250
or PSK250R depending on the request.

Would that make sense?

Regards,

John

On Wed, Dec 23, 2009 at 10:12 AM, Russell Blair
<russell_blair86@xxxxxxxxx> wrote:
> Thanks John, for now my server is Puppy mail v0.9.22 and I am running fldig 
> 0.3.12 but when I am in client mode I use fldigi-3.13BH and jPskmail 
> 0.4.0.2. The group is working on a fix for the server not to Tx RISD for 
> PSK500 mode in the U.S. Fred has been hard at it all day.
>
> Russell NC5O
>  1- Whoever said nothing is impossible never tried slamming a revolving door!
> 2- A government big enough to give you everything you want, is strong enough 
> to take everything you have.
> - Thomas Jefferson
>
>
> " IN GOD WE TRUST "
>
>
> Russell Blair (NC5O)
> Skype-Russell.Blair
> Hell Field #300
> DRCC #55
> 30m Dig-group #693
>
>
>
> ----- Original Message ----
> From: John Douyere <vk2eta@xxxxxxxxx>
> To: pskmail@xxxxxxxxxxxxx
> Sent: Tue, December 22, 2009 4:56:57 PM
> Subject: [pskmail] Re: New server update (Fred)
>
> Hello Russel and Fred,
>
> Just a couple of points which may be of help:
>
> Fred, I also had issues with RSID not switching sometimes. I noticed
> that selecting "search entire passband" in the ID configuration of
> Fldigi can help with the decoding. I can't explain why, but it did
> help in my case.
>
> Also sometimes I noticed that de-selecting and re-selecting the
> receive RSID button on Fldigi seems to jog it into play and it receive
> RSIDs immediately rather than after two attempts.
>
> Russell, it is ok for the server to be "wandering" on other modes
> since the client now always sends the connecting mode RSID before the
> connect. Therefore it will re-connect on any mode. And that even if it
> moved away from the default mode.
>
> On the other hand if you don't have RSID on, connections can only be
> made on the default mode.
>
> My suggestion is to leave RSID on and let it change at will. The only
> constraint then is that if someone uses an old version of Pskmail and
> Fldigi they will have to connect on the current (and therefore
> unknown) mode.
>
> Hope this helps,
>
> Best regards,
>
> John
>
>
>
> On Wed, Dec 23, 2009 at 3:20 AM, Russell Blair
> <russell_blair86@xxxxxxxxx> wrote:
>> Ok Well the band is getting long your just about gone for me, I'm not sure 
>> who is talking to who some time, If I start fldigi-3.13BH and it shows PSK31 
>> as the mode, and then I start jPSKmail-0.4.0.2 client and its set for 
>> PSK250, nothing changes or I'm not sure if it should, But I give it to for 
>> hanging in there with all this, and all the help thats around it will get 
>> all cleared up.
>>
>> Russell
>>  1- Whoever said nothing is impossible never tried slamming a revolving door!
>> 2- A government big enough to give you everything you want, is strong enough 
>> to take everything you have.
>> - Thomas Jefferson
>>
>>
>> " IN GOD WE TRUST "
>>
>>
>> Russell Blair (NC5O)
>> Skype-Russell.Blair
>> Hell Field #300
>> DRCC #55
>> 30m Dig-group #693
>>
>>
>>
>> ----- Original Message ----
>> From: Fred Reiselt <freiselt@xxxxxxxxxxxxx>
>> To: pskmail@xxxxxxxxxxxxx
>> Sent: Tue, December 22, 2009 10:12:06 AM
>> Subject: [pskmail] Re: New server update (Fred)
>>
>> Hi Russell,
>>
>> The server won't ask for you to update the server if it already has you in 
>> its database. You can update it anytime you want, if your mail info changes.
>>
>> That was probably me playing with the server. I'm still stuck on my fldigi 
>> not working properly with RSID. The server will send TxID and change speeds, 
>> but I can't get my client to follow the speed change, even though RxID is 
>> on. jPSKmail is properly setting RxID and TxID.
>>
>> I have tried making it work with just two fldigi's running on two machines, 
>> without pskmail_server or jPSKmail running. I've changed from my compiled 
>> fldigi to a pre-compiled binary. I've upgraded to fldigi 3.13BJ. Nothing is 
>> checked in the ID tab on fldigi configuration. So far nothing. I'm sure I'm 
>> gonna feel real stupid when I find the problem :>)
>>
>> 73,
>> Fred - wb5con
>>
>> Russell Blair wrote:
>>> Fred, the last few times I connect to your server it never ask for me to 
>>> update the server, So the last time I just sent it and you came back with 
>>> it had been updated. Someone today was TxRISD and switched me to PSK500R. 
>>> So I turned off the RxRISD ..
>>>
>>> Russell NC5O
>>>  1- Whoever said nothing is impossible never tried slamming a revolving 
>>>door!
>>> 2- A government big enough to give you everything you want, is strong 
>>> enough to take everything you have. - Thomas Jefferson
>>>
>>> " IN GOD WE TRUST "
>>>
>>> Russell Blair (NC5O)
>>> Skype-Russell.Blair
>>> Hell Field #300
>>> DRCC #55
>>> 30m Dig-group #693
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>
>
>
>
>




Other related posts: