Makes sense, I will check again... Rein PA0R >Hi Rein, > >Here are the results of my test with the latest client and server: > >The igate works great. > >I reproduced the issue I mentioned before by proceeding the following way: > >1. Start a mail download. In my case a 2K grib reply email. > >2. Close the client in the middle of receiving the mail at about 30%. >The size of the file in the pending directory is consistent with the >percentage downloaded. > >3. Restart and reconnect the client. Server sends FM frame as >expected, client comes back with FY and receiving of mail resumes >normally. > >4. Again, close client but at 78%. This time the size of the file in >the pending directory is reduced to 308 bytes from memory (or close to >that value) and contains a blank line as the first line. > >5. Relaunch and reconnect client results in resume but at 308 bytes >only and the received file is corrupted and can't be uncompressed. > >I restarted the whole sequence above a second time and got a similar result. > >So it seems that this happens after the second interruption on the >same email (after 2nd client close or 2nd abort as I saw last time) . > >Let me know what else I can test. > >This is on Ubuntu 8.04 by the way. > >Regards, > >John > >On Thu, Oct 7, 2010 at 12:13 AM, Rein Couperus wrote: >> There is new alpha software for testing: >> >> pskmail_server-1.0.23.tar.gz >> >> This new server supports the resume function (restart a download >> automatically after a disconnect). >> It also features a new info command: ~GETIAC downloads the latest IAC >> fleetcodes file from NOAA, >> which can then be viewed with zyGrib (available for windows as well as >> linux). >> >> jpskmail-0.7c >> >> The archive is called javapskmail.jar, and the best way to install it is to >> use the installer for jPSKmail-0.5.4, and then copying the new >> javapskmail,jar file over the >> existing one. jPSKmail-0.5.4 installs all the required libraries... >> >> The new client features an Igate function, which relays APRS beacons and >> APRS messages to the >> APRS-IS on the internet. As this is used on HF, the client does not QSL the >> beacons. This to keep contention on the >> pskmail APRS frequency to a minimum... As from now, you only need the client >> to build an HF APRS system.. >> >> The resume function has been ruggedized by adding some .flush here and >> there, the client will >> now resume even with only one line received... >> >> Also included is a menu command to download and auto-rename the latest IAC >> Fleetcodes file, >> to be displayed directly in zyGrib. >> >> The archives for server and client are available in >> http://hermes.esrac.ele.tue.nl/pskmail/alpha >> >> This test suite is a pre-beta release for the next stable client/server >> combination. >> If you have time, pse test this thoroughly, so I can get the bugs out before >> the beta release out... >> >> The client has been tested on Ubuntu 10.04 and Windows 2000.... >> The server runs on PI4TUE, hopefully soon on a server near you :) >> >> Have fun, >> >> 73, Rein PA0R >> >> -- >> http://pa0r.blogspirit.com >> >> >