[pskmail] Re: New PSKmail 0.3.7 downloaded.

  • From: Fred Reiselt <freiselt@xxxxxxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Tue, 25 Aug 2009 11:19:07 -0500

Got 3,13AD but it has the same problem. I looked for additional config for an unkey delay but saw nothing. There was something about a post write delay under the hamlib tab. I'm using hardware PTT. I may need to build a cable and get the rig working with hamlib.


Fred

Rein Couperus wrote:
3,13 wil do the trick...

Rein

-----Ursprüngliche Nachricht-----
Von: "Fred Reiselt" <freiselt@xxxxxxxxxxxxx>
Gesendet: 25.08.09 17:48:23
An: pskmail@xxxxxxxxxxxxx
Betreff: [pskmail] Re: New PSKmail 0.3.7 downloaded.


That is what I am running now. I downgraded to 3.10.2, and then to 3.10.

Fred

Rein Couperus wrote:
Back to fldigi 3.10?

Rein

-----Ursprüngliche Nachricht-----
Von: "Fred Reiselt" <freiselt@xxxxxxxxxxxxx>
Gesendet: 25.08.09 17:43:01
An: pskmail@xxxxxxxxxxxxx
Betreff: [pskmail] Re: New PSKmail 0.3.7 downloaded.
I added the extra two characters with no improvement. I added about 15 extra characters to the end and saw no difference with zero, two, or fifteen. I also cleaned out the ~/.fldigi directory, thinking that something left over might be causing a problem. But, it did not improve.

Still looking.....

73,
Fred WB5CON

Per Crusefalk wrote:
I have heard this happen to clients but not to servers, guess you won
that competition. I dont know what causes it, pulseaudio?

Anyway, I suppose you could try to add extra characters to every frame.
Try changing line 1198 of arq.pm into:
$sendstring = "\037" . $sendstring . "\000" . "--";

The "--" at the end are two extra characters added to each frame.

73 de Per, sm0rwo


mån 2009-08-24 klockan 15:03 -0500 skrev Fred Reiselt:
Well, I have tried fldigi 3.12.3, 3.12.4, 3.10.2, and 3.10. All are cutting off the transmission early. I am using hardware PTT on the serial port with RTS and DTS. I have also tried an older 0.8.8 pskmail server, but no change from 0.9.8. I tried to use VOX on the Kenwood but it only works on the mic jack and not the audio inputs on the rear panel.

Perhaps the install scripts on fldigi did not over write everything when I downgraded. I don't know but I'll keep searching.

This is the same exact hardware I have been using for the last year, except for the new hard drive and rebuilt software.

73,
Fred

PS - The WB5CON-3 is the client laptop and rig.

Russell Blair wrote:
Fred I'm running fldigi 3.12 as well and I loked around to see if I add some 
delay and was unable to find anything, It might be in the server software were 
you can add some space's as in the Postamble in 0.3.7. I did add some dashs in 
the postamble there in 0.3.7..

Russell 1- Whoever said nothing is impossible never tried slamming a revolving door! 2- A government big enough to give you everything you want, is strong enough to take everything you have. - Thomas Jefferson

" IN GOD WE TRUST "
Russell Blair (NC5O)
  Skype-Russell.Blair
  Hell Field #300
  DRCC #55
  30m Dig-group #693


--- On Mon, 8/24/09, Fred Reiselt <freiselt@xxxxxxxxxxxxx> wrote:

From: Fred Reiselt <freiselt@xxxxxxxxxxxxx>
Subject: [pskmail] Re: New PSKmail 0.3.7 downloaded.
To: pskmail@xxxxxxxxxxxxx
Date: Monday, August 24, 2009, 8:47 AM
There is a problem with the server.
It is cutting off the end of the transmission. It must be a
problem with fldigi 3.12. I have looked in the fldigi config
and poked around in arq.pm to add a few spaces to the
postamble but have not found the secret yet.

Any hints would be appreciated. Or, should I return to 3.10
fldigi?

73,
Fred

Fred Reiselt wrote:
I will check my server today and see if there is a
problem on this end. The server could be cutting off the TX
data too soon so the client can not receive it properly.
73
Fred  WB5CON

Rein Couperus wrote:
This is clearly not a TX problem but an RX
problem. The client does not react to
the polls...

You should see this on your link status indicator
(not green).
Rein PA0R


-----Ursprüngliche Nachricht-----
Von: "Pär Crusefalk" <per@xxxxxxxxxxxx>
Gesendet: 23.08.09 22:34:29
An: pskmail@xxxxxxxxxxxxx
Betreff: [pskmail] Re: New PSKmail 0.3.7
downloaded.
Hi Russel,
I looked through the log at wb5con and found
this QSO:
RX (2009-08-23 18:49Z): h Biu ARae r N
00uNC5O:7 279E
RX (2009-08-23 18:53Z): TX (2009-08-23
18:53Z): 00uWB5CON:71 055E
RX (2009-08-23 18:53Z): t e 7 r 00uNC5O:26
!3259.64N/09640.80Wy NC5O jPSKMail-v 0.3.7E10A
RX (2009-08-23 18:54Z): t TX (2009-08-23
18:54Z): QSL NC5O de WB5CON 407A
RX (2009-08-23 18:54Z): tUu e o ee o c t e u
iine m 00cNC5O:1024 WB5CON:24 5581A
RX (2009-08-23 18:55Z): couel on
TX (2009-08-23 18:55Z): 0EkWB5CON:24 NC5O:1024
5653A
RX (2009-08-23 18:55Z): naee TX (2009-08-23
18:55Z): 0E!
TX (2009-08-23 18:55Z): Hi NC5O, pse update
your record6C550E"
TX (2009-08-23 18:55Z): TX (2009-08-23
18:55Z): A5730Es" A96A
RX (2009-08-23 18:55Z): ad RX (2009-08-23
18:55Z): nen
TX (2009-08-23 18:55Z): 0Ep" ED6A
RX (2009-08-23 18:55Z): ee tc
TX (2009-08-23 18:55Z): 0Ep" ED6A
RX (2009-08-23 18:55Z): eDe te TX (2009-08-23
18:55Z): 0Ep" ED6A
RX (2009-08-23 18:55Z): Stki
TX (2009-08-23 18:56Z): 0Ep" ED6A
RX (2009-08-23 18:56Z): ee es
TX (2009-08-23 18:56Z): 0Ep" ED6A
RX (2009-08-23 18:56Z): eoeTn
RX (2009-08-23 18:56Z): l'
TX (2009-08-23 18:56Z): 0Ep" ED6A
RX (2009-08-23 18:56Z): attt o
TX (2009-08-23 18:56Z): 0Ep" ED6A
RX (2009-08-23 18:56Z): nex p
TX (2009-08-23 18:56Z): 0Ep" ED6A

So the position beacon was ok but during the
connected session the server did not get any good frames
from you.
I guess that could be due to conditions, local
QRM or something else?
The mentioned fldigi problem is that complete
frames are always sent to fldigi and it in turn keys the
transmitter,
sends the frame and stops the transmission.
Some have had a problem where fldigi stops the transmitter
too soon,
so there is no local monitor and can not be
any. We would have to receive what fldigi transmits for
that. The easiest
way to indicate this issue is just to listen
to the frames, if they sound cut (when compared to others)
then they
probably are. But, this is not a general issue
and it might not at all have anything to do with your
connected session
above.

73 de Per, sm0rwo

sön 2009-08-23 klockan 12:52 -0700 skrev
Russell Blair:Well OK they are both empty, but if I done get
a connect responce from the server to show me that I connect
to the server then I cant up date the server, maybe WB5CON
can look and his server log and see whats missing from my
request for connection. Oh the listening is also grayed out
on my gue interface. Is there some place where I can look
and see what being sent during my requset for connection.
Russell 1- Whoever said nothing is impossible never tried
slamming a revolving door! 2- A government big enough to
give you everything you want, is strong enough to take
everything you have. - Thomas Jefferson " IN GOD WE TRUST "
Russell Blair (NC5O) Skype-Russell.Blair Hell Field #
300 DRCC #55 30m Dig-group #693 --- On Sun,
8/23/09, Per Crusefalk <
per@xxxxxxxxxxxx>
wrote: > From: Per Crusefalk <per@xxxxxxxxxxxx>
Subject: [pskmail] Re: New PSKmail 0.3.7 downloaded.
To: pskmail@
freelists.org> Date: Sunday, August 23,
2009, 2:40 PM > Hi Russel, > >
They are both empty by default as extra
characters are > mostly not > needed. I have heard
stations that have their frames cut > short, some >
frames just barely make it and others lack the EOT >
character so I put > those fields there to be able to
handle it just in case. >
73 de Per, sm0rwo > > > sön
2009-08-23 klockan 12:25 -0700 skrev
Russell Blair: > > Ok, well I did as you
asked and I saw nothing on > WB5CON log, When I go the
the Frame Postamble there is > nothing there as well as
the Peramble. should ther be > something in there for me
to put spaces in front of.? > > > > Russell >
1- Whoever said nothing is impossible never
tried > slamming a revolving door! >
2- A government big enough to give you
everything you > want, is
strong enough to take everything you have.
- Thomas Jefferson > >
" IN GOD WE TRUST " > > >
Russell Blair (NC5O) > > Skype-
Russell.Blair > > Hell Field #300 >
DRCC #55 > > 30m Dig-group #693
--- On Sun, 8/23/09,
Per Crusefalk <per@xxxxxxxxxxxx>
wrote: > > > > > From: Per
Crusefalk <per@xxxxxxxxxxxx>
Subject:
[pskmail] Re: New PSKmail 0.3.7 >
downloaded. > > > To: pskmail@
freelists.org> > > Date: Sunday,
August 23, 2009, 12:57 PM > > > Hi Russel, >
Can you try agn and look at the log
page at > WB5CON while > > > you are trying?
That page is here: http://
wb5con.homedns.org/index.shtml> > > I
have heard a few stations (but I'm not saying > that IS
the > > > problem) > > > where fldigi is
not properly finishing the > frames, it stops > >
the tx too > > > soon.
If that is the case then add a few spaces >
to "frame > > > postamble"
on > > > the modem tab of the
preferences dialog. > > > > > > 73 de Per,
sm0rwo > > > > > > > > > sön
2009-08-23 klockan 10:42 -0700 skrev Russell > Blair:
I downloaded the new version 0.3.7 of
PSKmail and been > > > trying to
connect to WB5CON to update the server, > however I >
cant seem to get connected, each time I try to
connect > > > WB5CON respondes back to me but
I dont seem to > respond back > > > to him. I'm
using the same setting as was in > 0.3.
6 version. > > > Any Help. > >
Russell > > > > 1-
Whoever said nothing is impossible never > tried >
slamming a revolving door! > > > > 2-
A government big enough to give you > everything
you
want, is strong enough to take
everything you > have. > > > > -
Thomas Jefferson > > > > > >
" IN GOD WE TRUST " > > > > > >
Russell Blair (NC5O) > > > >
Skype-Russell.Blair > > > > Hell Field #
300 > > > > DRCC #55 > >
30m Dig-group #693 > > > > > >
   ------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG - www.avg.com Version: 8.5.409 /
Virus Database: 270.13.65/2322 - Release Date: 08/23/09
18:03:00
------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com Version: 8.5.409 / Virus
Database: 270.13.65/2322 - Release Date: 08/23/09 18:03:00
------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.65/2322 - Release Date: 08/23/09 18:03:00

------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.65/2323 - Release Date: 08/24/09 06:05:00

------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.66/2325 - Release Date: 08/25/09 06:08:00


------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.66/2325 - Release Date: 08/25/09 06:08:00


Other related posts: